Chapter2. Bill Recycling Machine (BRM) Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
2-281
Code
Problem Description
Troubleshooting
598HG20
Error to initialize CIS during
receiving BCU ready command
in the Customer Change .
1. Operate to initialize BRM(Recovery)
2. Check whether the sensor is
contaminated or not if same error
occures after Initialize
3. Reboot the system when same error
occures even though there is no
substance
598HG21
Error of power on during
receiving BCU ready command
in the Customer Change .
1. Operate to initialize BRM(Recovery)
2. Check whether the sensor is
contaminated or not if same error
occures after Initialize
3. Reboot the system when same error
occures even though there is no
substance
598HG22
Error of DD sensor initialization
during receiving BCU ready
command in the Customer
Change .
1. Operate to initialize BRM(Recovery)
2. Check whether the sensor is
contaminated or not if same error
occures after Initialize
3. Reboot the system when same error
occures even though there is no
substance
598HG23
Error of set up for DD sensor
DAC during receiving BCU
ready command in the
Customer Change .
1. Operate to initialize BRM(Recovery)
2. Check whether the sensor is
contaminated or not if same error
occures after Initialize
3. Reboot the system when same error
occures even though there is no
substance
598HG24
Error of encoder set-up mode
during receiving BCU ready
command in the Customer
Change .
1. Operate to initialize BRM(Recovery)
2. Check whether the sensor is
contaminated or not if same error
occures after Initialize
3. Reboot the system when same error
occures even though there is no
substance
598HG36
Error of recognized mode
during receiving BCU mode
command in the Customer
Change .
1. Check to the recoginzed mode
2. Operate to initialize BRM(Recovery)
3. Reboot the system when same error
occurred (message timeout error) after
initialization
598HG37
Error of transaction setting
during receiving BCU mode
command in the Customer
Change .
1. Check to the transaction setting
2. Operate to initialize BRM(Recovery)
3. Reboot the system when same error
occurred (message timeout error) after
initialization
598R100
BC message timeout error
during Customer Change
Ready.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
598R200
BC message timeout error
during Customer Change
Transaction.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization