Error Code List Chapter4. Cash & Check In Module
4-192
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
I75F1
[Deposit OK]Escrow task force
shutdown.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I7801
[Deposit OK] A command was not
executed due to a fault which has
occurred while preparing the main
task.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I7802
[Deposit OK]Main task force
shutdown.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I7803
[Deposit OK]Receives a command
which has not been defined in the
main task.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I7804
[Deposit OK]Internal Error while
the main task is operating.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I7805
[Deposit OK]Bundle part operation
timeout
1. Remove the residual media at the
Bundle part (1).
2. Execute initialization.
I7806
[Deposit OK]Media remaining at
the Reject part
1. Open the door of Reject(9) part and
remove the residual media.
2. Execute initialization.
I7807
[Deposit OK]Retract Box is not on
the home position.
1. Check whether the Retract Box(13) is
on the home position.
2. Execute initialization.
I7808
[Deposit OK] Media remains at the
first drive part and the BC part or
the BC is open.
1. Remove the residual media at the
SCM(2) and BC(3).
2. Execute initialization.
I7809
[Deposit OK]Media remaining at
the Alignment part
1. Alignment(4) part residual media
Execute initialization.
I780A
[Deposit OK]Media remaining at
the Recognition part
1. Remove the residual media at the
Recognition(5).
2. Execute initialization.
I780B
[Deposit OK]Media remaining at
the BM2 connection part
1. Open the BM2(7) and remove the
residual media at the moving path.
2. Execute initialization.
I780C
[Deposit OK]Media remaining at 3-
Way Gate 1
1. Open the BM2(7) and remove the
residual media at the moving path (7, 8).
2. Execute initialization.
I780D
[Deposit OK]Media remaining at 3-
Way Gate 2
1. Open the BM2(12) and remove the
residual media at the moving path (8,
10).
2. Execute initialization.
I780E
[Deposit OK]Media remaining at
the Escrow entry part
1. Open the BM2(12) and remove the
residual media at the moving path (10,
12).
2. Execute initialization.
I780F
[Deposit OK]Media remaining at
the Retract entry part
1. Remove the residual media at the RT
box entry (11).
2. Execute initialization.
I7810
[Deposit OK]Media remaining at
the Cassette1 entry
1. Open the BM2(7) and remove the
residual media at the moving path (6)
and Cassette1(14) entry.
2. Execute initialization.