Error Code Manual Chapter2. Bill Recycling Machine (BRM)
2-192
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
56AA100
Status of UTC removal before
the operation during
Withdrawal Ready.
1. Open the upper unit
2. Check removal of the cassette not
received(9)
56AA200
Status of TE open before the
operation during Withdrawal
Ready.
1. Open the upper Unit
2. Check open/close of TE(12)
56AA300
Status of BMU inter lock
detachment before the
operation during Withdrawal
Ready.
1. Check Load/Removal of the upper
unit
2. Replace a cherry switch when error
occures
56AA400
Status of BMU removal before
the operation during
Withdrawal Ready.
1. Check Load/Removal of the upper
unit
56AA600
Status of CSM open before the
operation during Withdrawal
Ready.
1. Open the upper Unit
2. Check open/close of CSM
3. Check sensor GS011
56AA700
Status of RJC removal before
the operation during
Withdrawal Ready.
1. Open the lower unit
2. Open the Mid Transport Path
3. Check the reject CST(21)
Load/Removal
56AA800
Status of BMD inter lock
detachment before the
operation during Withdrawal
Ready.
1. Check the lower Unit load/removal
2. Check the lower unit status of inter
lock
3. Exchange the cherry switch or clean
the inter lock sensor(or exchange) if
occur same error
56AA900
Status of BMD removal before
the operation during
Withdrawal Ready.
1. Check the lower Unit load/removal
2. Check the lower unit status of inter
lock
3. Exchange the cherry switch or clean
the inter lock sensor(or exchange) if
occur same error
56AAA00
Status of BC open before the
operation during Withdrawal
Ready.
1. Open the upper unit
2. Check the lock lever in the BC
56AAB00
Status of RC full before the
operation during Withdrawal
Ready.
1. Open the lower unit
2. Open the Mid Transport Path
3. Check the GSx11 full detection
sensor of recycle cassettes(A~E)
4. Open the cassette door
5. Check the notes full in the cassette
56AAC00
Status of RJC full before the
operation during Withdrawal
Ready.
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove reject cassette(21)
4. Remove notes after checking notes
full in the cassette
5. Check whether the sensor is
contaminated or not if a cassette is
empty.
56AAD00
Status of UTC1 full before the
operation during Withdrawal
Ready.
1. Open the upper unit
2. Open the cassette not received(9)
3. Check the cassette not received(9) is
full