Nautilus Hyosung MX8800, Руководство пользователя, Страница: 717 / 827

Error Code List Chapter4. Cash & Check In Module
4-164 © 2014 Nautilus Hyosung Inc. All Rights Reserved.
Code Problem Description Troubleshooting
I6529 [Deposit Cancel]When detecting
the Escrow Drum hole, the drum
hole is not dark-detected (ESS01
or ESS02 Dark) and if 150 ms is
exceeded, a fault occurs. 1. Open the Escrow Part(12).
2. Remove the ESS01 and ESS02
media and pollution.
3. Execute CCIM initialization.
I652A [Deposit Cancel]When detecting
the Escrow Drum hole, the drum
hole is not light-detected (ESS01,
ESS02) after detecting the drum
hole dark and if 350 ms is
exceeded, a fault occurs. 1. Open the Escrow Part(12).
2. Remove the ESS01 and ESS02
media and pollution.
3. Execute CCIM initialization.
I652B [Deposit Cancel] When both of
Escrow Tape Start (ESS06)
sensor and the End sensor are
detected simultaneously. 1. Open the Escrow Part(12).
2. Remove the ESS06 and ESS07
media and pollution.
3. Execute CCIM initialization.
I652C [Deposit Cancel]When checking
the residual in the Escrow and
tape end is detected so that retry
is made, the number of retries
exceeds the limit. 1. Open the Escrow Part(12).
2. Remove the ESS07 media and
pollution.
3. Execute CCIM initialization.
I652D [Deposit Cancel]After checking the
residual in the Escrow, tape start
is not detected for 100 mm and
14s is exceeded. 1. Open the Escrow Part(12).
2. Remove the ESS01 and ESS02
media and pollution.
3. Execute CCIM initialization.
I652E [Deposit Cancel]The residual
media before the Escrow entry or
Drum is detected (ESS04, ESS03)
while winding the media. 1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I652F [Deposit Cancel]The residual
media before the Escrow entry or
Drum is detected (ESS04, ESS03)
while winding the media. 1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I6530 [Deposit Cancel]The residual
media before the Escrow entry or
Drum is detected (ESS04, ESS03)
while discharging the media. 1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I6531 [Deposit Cancel]The residual
media before the Escrow entry or
Drum is detected (ESS04, ESS03)
while discharging the media. 1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I6580 [Deposit Cancel]Receives a
command which says to unwind
the roll of the Escrow until
exceeding the number of winding
media. 1. Check Sensor (Escrow entry (FDS15)
and output check (EES04) sensor)
2. Execute initialization.