Error Code List Chapter4. Cash & Check In Module
4-78
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
I370B
[Entry In/Out]Jam occurs at the
Recog entry sensor (RCS01)
when executing MICR.
1. Remove the internal media and alien
materials in the Recognition(5).
2. If the same fault continuously occurs
after checking the device, replace the
Recognition(5) Module.
I3801
[Entry In/Out] A command was not
executed due to a fault which has
occurred while preparing the main
task.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I3802
[Entry In/Out]Main Task force
shutdown.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I3803
[Entry In/Out] Receives a
command which has not been
defined in the main task.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I3804
[Entry In/Out]Internal Error while
the main task is operating.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I3805
[Entry In/Out]Bundle part
operation timeout
1. Remove the residual media at the
Bundle part (1).
2. Execute initialization.
I3806
[Entry In/Out]Reject Part residual
fault
1. Open the door of Reject(9) part and
remove the residual media.
2. Execute initialization.
I3807
[Entry In/Out]Retract Box is not on
the home position.
1. Check whether the Retract Box(13) is
on the home position.
2. Execute initialization.
I3808
[Entry In/Out] Media remains at
the first drive part and the BC part
or the BC is open.
1. Remove the residual media at the
SCM(2) and BC(3).
2. Execute initialization.
I3809
[Entry In/Out]Alignment Part
residual fault
1. Alignment(4) part residual media
2. Execute initialization.
I380A
[Entry In/Out]Recognition Part
residual fault
1. Remove the residual media at the
Recognition(5).
2. Execute initialization.
I380B
[Entry In/Out]BM2 connection part
residual fault
1. Open the BM2(7) and remove the
residual media at the moving path.
2. Execute initialization.
I380C
[Entry In/Out] Media remaining at
the 3-Way Gate 1
1. Open the BM2(7) and remove the
residual media at the moving path (7, 8).
2. Execute initialization.
I380D
[Entry In/Out] Media remaining at
the 3-Way Gate 2
1. Open the BM2(12) and remove the
residual media at the moving path (8,
10).
2. Execute initialization.
I380E
[Entry In/Out]Media remaining at
the BM2 connection part
1. Open the BM2(12) and remove the
residual media at the moving path (10,
12).
2. Execute initialization.
I380F
[Entry In/Out]Media remaining at
the Retract entry
1. Remove the residual media at the RT
box entry (11).
2. Execute initialization.
I3810
[Entry In/Out]Media remaining at
the Cassette1 entry
1. Open the BM2(7) and remove the
residual media at the moving path (6)
and Cassette1(14) entry.
2. Execute initialization.