Nautilus Hyosung MX8800, Руководство пользователя, Страница: 691 / 827

Error Code List Chapter4. Cash & Check In Module
4-138 © 2014 Nautilus Hyosung Inc. All Rights Reserved.
Code Problem Description Troubleshooting
I552A [Deposit Reject]When detecting
the Escrow Drum hole, the drum
hole is not light-detected (ESS01,
ESS02) after detecting the drum
hole dark and if 350 ms is
exceeded, a fault occurs. 1. Open the Escrow Part(12).
2. Remove the ESS01 and ESS02
media and pollution.
3. Execute CCIM initialization.
I552B [Deposit Reject] When both of
Escrow Tape Start (ESS06)
sensor and the End sensor are
detected simultaneously. 1. Open the Escrow Part(12).
2. Remove the ESS06 and ESS07
media and pollution.
3. Execute CCIM initialization.
I552C [Deposit Reject]When checking
the remaining in the Escrow and
tape end is detected so that retry
is made, the number of retries
exceeds the limit. 1. Open the Escrow Part(12).
2. Remove the ESS07 media and
pollution.
3. Execute CCIM initialization.
I552D [Deposit Reject]After checking the
remaining in the Escrow, tape
start is not detected for 100 mm
and 14s is exceeded. 1. Open the Escrow Part(12).
2. Remove the ESS01 and ESS02
media and pollution.
3. Execute CCIM initialization.
I552E [Deposit Reject]The remaining
before the Escrow entry or Drum
is detected (ESS04, ESS03) while
winding the media. 1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I552F [Deposit Reject]The remaining
before the Escrow entry or Drum
is detected (ESS04, ESS03) while
winding the media. 1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I5530 [Deposit Reject]The remaining
before the Escrow entry or Drum
is detected (ESS04, ESS03) while
discharging the media. 1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I5531 [Deposit Reject]The remaining
before the Escrow entry or Drum
is detected (ESS04, ESS03) while
discharging the media. 1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I5580 [Deposit Reject]Receives a
command which says to unwind
the roll of the Escrow until
exceeding the number of winding
media. 1. Check Sensor (Escrow entry (FDS15)
and output check (EES04) sensor)
2. Execute initialization.
I55F1 [Deposit Reject]Escrow task force
shutdown. 1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I5602 [Deposit Reject]Batch moving
stage down fail. 1. Check whether the reject batch return
stage down detection (RJS07) sensor is
normally running.
2. Check whether the multiple return
clamp motor (RJM01) is running.