Error Code Manual Chapter2. Bill Recycling Machine (BRM)
2-332
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
5B07Q00
Error occurred by the notes
disorder on the GS034 during
Retract TE.
1. Open the lower unit
2. Rotate the knob of the Mid Transport
Path
3. Remove notes and substance in the
Mid Transport Path(13)
4. Check whether the sensor is
contaminated or not if there are No
notes or substance
5B07W00
Error occurred by the notes
disorder on the GS802 during
Retract TE.
1. Open the upper unit
2. Open the customer service module
(CSM)
3. Open the BC(5)
4. Remove notes and substance in the
BC(5)
5. Check whether the sensor is
contaminated or not if there are No
notes or substance
5B0DR00
Error of failure to synchronizing
recognition during Retract TE.
1. Operate to initialize BRM(Recovery)
5B0DS00
Error of failure to synchronizing
recognition during Retract TE.
1. Operate to initialize BRM(Recovery)
5B0DT00
Error of failure to synchronizing
recognition during Retract TE.
1. Operate to initialize BRM(Recovery)
5B0DU00
Error of failure to synchronizing
recognition during Retract TE.
1. Operate to initialize BRM(Recovery)
5B0DV00
Error of failure to synchronizing
recognition during Retract TE.
1. Operate to initialize BRM(Recovery)
5B0DW00
Error of failure to synchronizing
recognition during Retract TE.
1. Operate to initialize BRM(Recovery)
5B0DX00
Error of failure to synchronizing
recognition during Retract TE.
1. Operate to initialize BRM(Recovery)
5B0DY00
Error of failure to synchronizing
recognition during Retract TE.
1. Operate to initialize BRM(Recovery)
5B0F100
GM001 motor step out return
error during Retract TE.
1. Open the upper unit
2. Check the Front Transport Path(4)
knob rotates softly
3.Check remained Notes and substance
in the upper Transport Path
4. Check the GS804 Sensor
5B0F200
GM002 motor step out return
error during Retract TE.
1. Open the upper unit
2. Check the Rear Transport Path(8)
knob rotates softly
3.Check remained Notes and substance
in the upper Transport Path
4. Check the GS007 Sensor
5B0F400
GM004 motor step out return
error during Retract TE.
1. Open the lower unit
2. Check the knob rotates in the Mid
Transport Path(20)
3. Check the notes and substance
inside of the Mid Transport Path
4. Check the sensor GS023 status
5B0F500
Decreased encoder count of
GM001 moter less than
previous values during Retract
TE.
1. Operate to initialize BRM(Recovery)