Chapter4. Cash & Check In Module Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
4-241
Code
Problem Description
Troubleshooting
I9530
[Retract]The remaining before the
Escrow entry or Drum is detected
(ESS04, ESS03) while outputting
the media.
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I9531
[Retract]The remaining before the
Escrow entry or Drum is detected
(ESS04, ESS03) while outputting
the media.
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I9580
[Retract]Receives a command
which says to unwind the roll of
the Escrow until exceeding the
number of winding media.
1. Check Sensor (Escrow entry (FDS15)
and output check (EES04) sensor)
2. Execute initialization.
I95F1
[Retract]Escrow Task force shut
down.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I9602
[Retract]Batch moving stage down
fail.
1. Check whether the reject batch return
stage down detection (RJS07) sensor is
normally running.
2. Check whether the multiple return
clamp motor (RJM01) is running.
I9603
[Retract]Batch moving stage up
fail.
1. Check whether the reject batch return
stage up detection (RJS06) sensor is
normally running.
2. Check whether the multiple return
clamp motor (RJM01) is running.
I9604
[Retract] Batch moving stage
sensor fault.
1. Check whether the reject batch return
stage down detection (RJS07) sensor is
normally running.
2. Check whether the multiple return
clamp motor (RJM01) is running.
I9605
[Retract]The media at the reject
part is not moved to the Bundle
output check sensor (RJS09)
within a specified time.
1. Reject Door(9) Open
2. Remove the notes and alien materials
in the Reject.
3. If no alien material exists, check
whether the Reject part sensors (RJS01,
RJS02, RJS03, RJS04, RJS05, RJS08,
RJS09) and the sensor (RJS10)
detecting the media residual at the reject
output are polluted.
I9606
[Retract]After moving the media at
the Reject part to the Bundle, the
media remains at the Reject part.
1. Reject Door(9) Open
2. Remove the notes and alien materials
in the Reject.
3. If no alien material exists, check
whether the Reject part sensors (RJS01,
RJS02, RJS03, RJS04, RJS05, RJS08,
RJS09) and the sensor (RJS10)
detecting the media residual at the reject
output are polluted.