Chapter2. Bill Recycling Machine (BRM) Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
2-277
Code
Problem Description
Troubleshooting
596R200
CSM message timeout error
during Customer Change
Transaction.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
596R300
CSM message timeout error
during postprocessing to
Customer Change Error.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5971300
GS703 dark jam during
Customer Change.
1. Open the upper unit
2. Open the TE(Temporary Escrow) (12)
3. Rotate a knob of TE(12)
4. Remove notes and substance in the
Rear Transport Path(11)
5972100
Error occurred by the notes
remained on the GS701 during
Customer Change.
1. Open the upper unit
2. Open the TE(Temporary Escrow) (12)
3. Rotate a knob of TE(12)
4. Remove notes and substance in the
Rear Transport Path(11)
5972200
Error occurred by the notes
remained on the GS702 during
Customer Change.
1. Open the upper unit
2. Open the TE(Temporary Escrow) (12)
3. Rotate a knob of TE(12)
4. Remove notes and substance in the
Rear Transport Path(11)
5972300
Error occurred by the notes
remained on the GS703 during
Customer Change.
1. Open the upper unit
2. Open the TE(Temporary Escrow) (12)
3. Rotate a knob of TE(12)
4. Remove notes and substance in the
Rear Transport Path(11)
5972800
Error occurred by the notes
remained on the GS709 during
Customer Change.
1. Open the upper unit
2. Open the TE(Temporary Escrow) (12)
3. Rotate a knob of TE(12)
4. Remove notes and substance in the
Rear Transport Path(11)
597G100
Motor stack direction operation
disorder during Customer
Change.
1. Open the upper unit
2. Confirm to Rotate a knob of TE(12)
softly
597G200
Motor separate direction
operation disorder during
Customer Change.
1. Open the upper unit
2. Confirm to Rotate a knob of TE(12)
softly
597G300
Motor stop disorder during
Customer Change.
1. Open the upper unit
2. Confirm to Rotate a knob of TE(12)
softly
597G400
No detect the front end of tape
during Customer Change.
1.Open upper Unit
2. Check the notes remain in the TE(12)
3. Check the color of tape´s front
end is black in the TE(12)
4. Remove notes remain in the TE
597G500
Detect the front end of tape
during Customer Change.
1.Open upper Unit
2. Check the notes remain in the TE(12)
3. Check the color of tape´s front
end is black in the TE(12)
4. Remove notes remain in the TE