Chapter2. Bill Recycling Machine (BRM) Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
2-401
Code
Problem Description
Troubleshooting
5D3GB00
Encoder Sensor(GS307) for
Feed Motor failed to detect
Light status when Feed Motor
runs in stacking direction
during Initialize .
1. Open the lower unit.
2. Open the Mid Transport Path.
3. Take out the recycle cassette #3 and
open its door.(C)
4. Remove jammed notes or substance
using any wheels on the upper side.
5. See whether GS307 works fine if
there is nothing jammed.
5D3GC00
Encoder Sensor(GS307) for
Feed Motor failed to detect
Dark status when Feed Motor
runs in stacking direction
during Initialize .
1. Open the lower unit.
2. Open the Mid Transport Path.
3. Take out the recycle cassette #3 and
open its door.(C)
4. Remove jammed notes or substance
using any wheels on the upper side.
5. See whether GS307 works fine if
there is nothing jammed.
5D3GD00
Detect GS301, GS302 as
excessive notes during
Initialize
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (C)
4. Put down the Stage after open the
recycle cassette door (C)
5. Remove note.
5D3GE00
Detect GS308(separate
pressure) as excessive note at
FM homeposition movement
durting Initialize
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (C)
4. Put down the Stage after open the
recycle cassette door (C)
5. Remove note.
5D3GF00
Detect both GS308(separate
pressure) and GS312(Bottom)
as excessive note durting
Initialize
1. Open the lower unit
2. Open the Mid Transport Path
3. Remove the recycle cassette (C)
4. Put down the Stage after open the
recycle cassette door (C)
5. Remove note.
5D3GG00
Encoder Sensor(GS313) for
Stack Roller failed to detect
Dark status when Feed Motor
runs in stacking direction
during Initialize.
1. Open the lower unit.
2. Open the Mid Transport Path.
3. Take out the recycle cassette #3 and
open its door.(C)
4. Remove jammed notes or substance
using any wheels on the upper side.
5. See whether GS313 works fine if
there is nothing jammed.
5D3GH00
Encoder Sensor(GS313) for
Stack Roller failed to detect
Light status when Feed Motor
runs in stacking direction
during Initialize.
1. Open the lower unit.
2. Open the Mid Transport Path.
3. Take out the recycle cassette #3 and
open its door.(C)
4. Remove jammed notes or substance
using any wheels on the upper side.
5. See whether GS313 works fine if
there is nothing jammed.