Error Code Manual Chapter2. Bill Recycling Machine (BRM)
2-368
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
5C7H300
Failure to write TE EEPROM
during EEPROM R/W.
1. Check TE EEPROM
2. Cehck TE EEPROM connection
3. Replace TE B/D if same error occures
during EEPROM R/W
5C7H400
Failure to read TE EEPROM
during EEPROM R/W.
1. Check TE EEPROM
2. Cehck TE EEPROM connection
3. Replace TE B/D if same error occures
during EEPROM R/W
5CAE100
Received operation command
without Initial Info Set during
EEPROM R/W.
1. Restart over AP-SP
2. Do transation operation follow by set
up read system Info for TM Test-> Initail
Info Set -> Initialization
5CAE200
Status on not operation
receiption command during
EEPROM R/W.
1. Restart over AP-SP
2. Do transation operation follow by set
up read system Info for TM Test-> Initail
Info Set -> Initialization
5CAE300
Received operation command
without System Info Read
during EEPROM R/W.
1. Restart over AP-SP
2. Do transation operation follow by set
up read system Info for TM Test-> Initail
Info Set -> Initialization
5CAE400
EEPROM R/W transaction was
executed without Initializing
after power on .
1. Restart over AP-SP
2. Do transation operation follow by set
up read system Info for TM Test-> Initail
Info Set -> Initialization
5CAE600
Error to received EEPROM
R/W during TE Button
Operating.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5CAEE00
RBU RS485 communication
sequence disorder during
EEPROM R/W.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5CAEF00
RBU RS485 connection line
disorder during EEPROM R/W.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5CAH500
Error to
NVRAM(128denominations)
Read/ Write during EEPROM
R/W.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5CAS100
Selected module is not exist
when received EEPROM R/W
Command.
1. Operate to initialize BRM(Recovery)
5CAS200
Selected write option is not
exist when received EEPROM
R/W Command.
1. Operate to initialize BRM(Recovery)
5CBH100
RC1 EEPROM read error
when EEPROM R/W.
1. Check the RC Connector
2. Reload the RC after removing RC
3. Replace the RC if same error occures
during initialization
5CBH200
RC2 EEPROM read error
when EEPROM R/W.
1. Check the RC Connector
2. Reload the RC after removing RC
3. Replace the RC if same error occures
during initialization