Chapter4. Cash & Check In Module Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
4-31
Code
Problem Description
Troubleshooting
I1B18
[Initialize]Jam at Cassette1 entry
detection sensor (FDS18)
1. Open the BM2(7) and remove the
residual media at the moving path (6)
and Cassette1(14) entry.
2. Execute initialization.
I1B19
[Initialize]Jam at Cassette2entry
detection sensor (FDS19)
1. Remove the residual media at the
Cassette2 entry (11).
2. Execute initialization.
I1B21
[Initialize] Residual fault in the
SCM.
1. SCM(2) Open
2. Remove the notes and alien materials
in the SCM. and Bundle.
I1B22
[Initialize] Residual fault in the
SCM.
1. SCM(2) Open
2. Remove the notes and alien materials
in the SCM. and Bundle.
I1B23
[Initialize] Residual fault in the
SCM.
1. SCM(2) Open
2. Remove the notes and alien materials
in the SCM. and Bundle.
I1B24
[Initialize] Residual fault in the
SCM.
1. SCM(2) Open
2. Remove the notes and alien materials
in the SCM. and Bundle.
I1B25
[Initialize] Residual fault in the
SCM.
1. SCM(2) Open
2. Remove the notes and alien materials
in the SCM. and Bundle.
I1B26
[Initialize] Residual fault in the
SCM.
1. SCM(2) Open
2. Remove the notes and alien materials
in the SCM. and Bundle.
I1B27
[Initialize] Jam at the BC entry
sensor (BCS01).
1. Open the BC cover(3) and remove the
residual media and alien materials.
2. Check the BC Lock state.
I1B28
[Initialize] Jam at the BC entry
sensor (BCS02).
1. Open the BC cover(3) and remove the
residual media and alien materials.
2. Check the BC Lock state.
I1B29
[Initialize] Jam at the BC entry
sensor (BCS01,BCS02).
1. Open the BC cover(3) and remove the
residual media and alien materials.
2. Check the BC Lock state.
I1B2A
[Initialize]Jam at Escrow entry
sensor (FDS15)
1. Open the BM4 moving path and then
remove the residual media and alien
materials.
I1B2B
[Initialize]Jam at the Align entry
detection sensor (AAS06).
1. Open the alignment(4) cover and
remove the residual media and alien
materials.
2. Initialize the device.
3. Check the alignment(4) cover lock
state.
I1B2C
[Initialize]Align detection sensor
(AAS05) jam
1. After opening the BM2(7) moving
path, open the Alignment(4) Guide2 to
remove media and alien materials.
2. Initialize the device.
4. If the same fault continuously occurs
after checking the device, replace the
Alignment(4) Module.