Chapter4. Cash & Check In Module Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
4-251
Code
Problem Description
Troubleshooting
I9B25
[Retract]Residual fault in the SCM. 1. SCM(2) Open
2. Remove the notes and alien materials
in the SCM. and Bundle.
I9B26
[Retract]Residual fault in the SCM. 1. SCM(2) Open
2. Remove the notes and alien materials
in the SCM. and Bundle.
I9B27
[Retract]Jam at the BC entry
sensor (BCS01).
1. Open the BC cover(3) and remove the
residual media and alien materials.
2. Check the BC Lock state.
I9B28
[Retract]Jam at the BC entry
sensor (BCS02).
1. Open the BC cover(3) and remove the
residual media and alien materials.
2. Check the BC Lock state.
I9B29
[Retract]Jam at the BC entry
sensor (BCS01,BCS02).
1. Open the BC cover(3) and remove the
residual media and alien materials.
2. Check the BC Lock state.
I9B2A
[Retract]Jam at Escrow entry
sensor (FDS15)
1. Open the BM4 moving path and then
remove the residual media and alien
materials.
I9B2B
[Retract]Jam at the Align entry
detection sensor (AAS06).
1. Open the alignment(4) cover and
remove the residual media and alien
materials.
2. Initialize the device.
3. Check the alignment(4) cover lock
state.
I9B2C
[Retract]Align detection sensor
(AAS05) jam
1. After opening the BM2(7) moving
path, open the Alignment(4) Guide2 to
remove media and alien materials.
2. Initialize the device.
4. If the same fault continuously occurs
after checking the device, replace the
Alignment(4) Module.
I9B2D
[Retract]Align detection sensor
(AAS03) jam.
1. Open the alignment(4) cover and
remove the residual media and alien
materials.
2. Initialize the device.
3. Check the alignment(4) cover lock
state.
I9B2E
[Retract]Recog detection sensor
(RCS01) jam.
1. Remove the internal media and alien
materials in the Recognition(5).
2. Initialize the device.
3. If the same fault continuously occurs
after checking the device, replace the
Recognition(5) Module.
I9B2F
[Retract]Jam at Recog exit moving
sensor (FDS07).
1. Open the BM2(7) Upper Guide and
remove the residual media and alien
material.
2. Open the BM3 moving path to remove
the residual media.
I9B30
[Retract]Jam at Recog exit moving
sensor (FDS23).
1. Open the BM2(7) Upper Guide and
remove the residual media and alien
material.
2. Open the BM3 moving path to remove
the residual media.