Error Code List Chapter4. Cash & Check In Module
4-232
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
I9302
[Retract] Low-speed moving path
up fault
1. Check whether the Bundle low-speed
moving path (BDM02) is running.
2. Reboot the system when the same
error occurs.
3. Replace the motor and cables when
the same error occurs after checking the
device.
I9303
[Retract] Low-speed moving path
down fault
1. Check whether the Bundle low-speed
moving path (BDM02) is running.
2. Reboot the system when the same
error occurs.
3. Replace the motor and cables when
the same error occurs after checking the
device.
I9304
[Retract] Shutter sensor fault.
1. Check and remove the alien materials
in the Bundle Shutter Open (BDS11)
and Close(BDS12) sensors.
2. If no alien material exists, check
whether the sensor is polluted.
I9305
[Retract] Shutter Open fault.
1. Check the inside of the Bundle and
the Shutter.
2. Remove banknotes or the alien
materials in the Shutter.
3. Check whether the Shutter Open
successfully operates.
I9306
[Retract] Shutter Close fault.
1. Check the inside of the Bundle and
the Shutter.
2. Remove banknotes or the alien
materials in the Shutter.
3. Check whether the Shutter Close
successfully operates.
I9307
[Retract] Billpress sensor fault.
1. Check and remove the alien materials
in the Bundle Bill Press part (BDS15,
BDS16) sensors.
2. If no alien material exists, check
whether the sensor is polluted.
I9308
[Retract] Billpress moving path
position startup fault
1. Check the inside of the Bundle(1).
2. Remove the alien materials of the
Billpress.
3. If no alien material exists in the
Billpress, check and remove the alien
materials in the Bundle Bill Press home
position (BDS15) sensor.
4. If no alien material exists, check
whether the sensor is polluted.
I9309
[Retract] Billpress separation
position startup fault.
1. Check the inside of the Bundle(1).
2. Remove the alien materials of the
Billpress.
3. If the Billpress is up, check whether
the state is BDS18 Dark.
4. If it is not dark, move the P Roller and
check whether the state of BDS18 is
changed.