Error Code List Chapter4. Cash & Check In Module
4-176
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
I6C0B
[Deposit Cancel]JAAS06 is not
reached (Light JAM) fault when
separating media.
1. BC(3) and SCM(2) Open
2. Remove the notes and alien materials
in the BC, SCM. and Bundle.
3. Check the BC and SCM Half Lock
state.
4. If no alien material exists in the BC
and SCM, check whether the SCM
internal media detection sensors
(FDS01, FDS02, FDS03, FDS04,
FDS05) are polluted.
I6C0C
[Deposit Cancel]JAAS05 Light
Timeout fault
1. Alignment(4) Open
2. Alignment(4) part residual media
I6C0D
[Deposit Cancel]JAAS03 Light
Timeout fault
1. Alignment(4) Open
2. Alignment(4) part residual media
I6C0E
[Deposit Cancel]JRCS01 Light
Timeout fault
1. Alignment(4) Open
2. Alignment(4) part residual media
I6C0F
[Deposit Cancel]JFDS07 Light
Timeout fault
1. Remove the internal media and alien
materials in the Recognition(5).
2. If the same fault continuously occurs
after checking the device, replace the
Recognition(5) Module.
I6C10
[Deposit Cancel]JFDS23 Light
Timeout fault
1. Remove the internal media and alien
materials in the Recognition(5).
2. If the same fault continuously occurs
after checking the device, replace the
Recognition(5) Module.
I6C11
[Deposit Cancel]JFDS09 Light
Timeout fault
1. Open the BM2(7) Upper Guide and
remove the residual media and alien
material.
2. Open the BM3 moving path to remove
the residual media.
I6C12
[Deposit Cancel]JFDS12 Light
Timeout fault
1. Open the BM2(7) and then remove
the residual media and alien materials.
2. Check the 3Way-Gate1 operation
state (FDM06)
I6C13
[Deposit Cancel]JFDS18 Light
Timeout fault
1. Open the BM2(7) and then remove
the residual media and alien materials.
2. Check the 3Way-Gate1 operation
state (FDM06)
I6C14
[Deposit Cancel]JNCS07 Light
Timeout fault
1. Open the BM2(7) and remove the
residual media at the moving path (6)
and Cassette1(14) entry.
2. Execute initialization.
I6C15
[Deposit Cancel]JRJS08 Light
Timeout fault
1. Open the third moving path (8) and
then remove the residual media and
alien materials.
2. Check the 3Way-Gate2 operation
state (FDM07)
I6C16
[Deposit Cancel]JPRS01 Light
Timeout fault
1. Open the third moving path (8) and
then remove the residual media and
alien materials.
2. Check the 3Way-Gate2 operation
state (FDM07)