Verifone VX805 Integration Guide
Note:
Before this integration can begin, you will need your
VAR sheet
or
Setup letter
from
Verifone. If you do not have this information, you can contact Verifone on
1-800-VERIFONE
.
This integration is
only
compatible with Windows till systems.
Installing the app
1.
Log in to your
Epos Now Back Office
2.
Head to
Apps
along the left-hand side
3.
Use your touchscreen keyboard to bring up the URL bar by pressing
CTRL + F12
4.
Select
any
app showing on the home screen of the app page - you will see an address in
the URL bar with some numbers at the end
5.
Remove the numbers from the end of this URL and replace them with
253
6.
Press enter on your keyboard
7.
Install the
Mercury EMV
app (this app is free to install)
This completes the installation of the payment app on your till software.
Activating the app
1.
Log in to your
Epos Now Back Office
2.
Head to the
Setup
tab (top left corner)
3.
Select
Locations
4.
Select
Locations and Devices
5.
Scroll to the right on your location, select
Show Devices
6.
Locate the device you wish to connect the card reader to, select
Edit
7.
Scroll to the right, tick the
Mercury
tick box
8.
Scroll to the left, select
Update
Mercury will now show as
enabled
on the device.
Configuring the card reader
Downloading the card reader software
to download the software. Follow the steps below to continue with the installation:
1.
You will see the folder downloading in the bottom left hand corner, select the download
2.
Select
open
and
run
