background image

 

 

Part 1 

 
 
 
 
 

FCC Notes: 

This  equipment  generates,  uses,  and  can  radiate  radio  frequency 
energy  and,  if  not  installed  and  used  in  accordance  with  the 
instructions manual, may cause interference to radio communications. It has been tested 
and  found  to  comply  with  limits  for  a  Class  A  digital  device  pursuant  to  subpart  J  of 
Part  15  of  FCC  Rules,  which  are  designed  to  provide  reasonable  protection  against 
interference when operated in a commercial environment. Operation of this equipment 
in  a  residential  area  is  likely  to  cause  interference  in  which  case  the  user  at  his  own 
expense will be required to take whatever measures to correct the interference. 

Warranty Limits: 

Warranty  terminates  automatically  when  any  person  other  than  the  authorized 
technicians opens the machine. The user should consult his/her dealer for the problem 
happened. Warranty voids if the user does not follow the instructions in application of 
this  merchandise.  The  manufacturer  is  by  no  means  responsible  for  any  damage  or 
hazard caused by improper application. 

About This Manual: 

Posiflex Technology, Inc. has made every effort for the accuracy of the content in this 
manual. However, Posiflex Technology, Inc. will assume no liability for any

 

technical 

inaccuracies  or  editorial  or  other  errors  or  omissions  contained  herein,  nor  for  direct, 
indirect,  incidental,  consequential  or  otherwise  damages,  including  without  limitation 
loss of data or profits, resulting from furnishing, performance, or use of this material.

 

This information is provided “as is” and Posiflex Technology, Inc. expressly disclaims 
any  warranties,  expressed,  implied  or  statutory,  including  without  limitation  implied 
warranties  of  merchantability  or  fitness  for  particular  purpose,  good  title  and  against 
infringement. 
The  information  in  this  manual  contains  only  essential  hardware  concerns  for  general 
user  and  is  subject  to  change  without  notice.  Posiflex  Technology,  Inc.  reserves  the 
right  to  alter  product  designs,  layouts  or  drivers  without  notification.  The  system 
integrator shall provide applicative notices and arrangement for special options utilizing 
this product. The user may find the most up to date information of the hardware from: 
http://www.posiflex.com or http://www.posiflex.com.tw or http://www.posiflexusa.com 
All  data  should  be  backed-up  prior  to  the  installation  of  any  drive  unit  or  storage 
peripheral.  Posiflex  Technology,  Inc.  will  not  be  responsible  for  any  loss  of  data 
resulting from the use, disuse or misuse of this or any other Posiflex product. 
All  rights  are  strictly  reserved.  No  part  of  this  documentation  may  be  reproduced, 
stored  in  a  retrieval  system,  or  transmitted  in  any  form  or  by  any  means,  electronic, 
mechanical,  photocopying,  or  otherwise,  without  prior  express  written  consent  from 
Posiflex Technology, Inc. the publisher of this documentation. 

©

 Copyright Posiflex Technology, Inc. 2011

 

All brand and product names and trademarks are the property of their respective holders.

 

DT-308 Series 

Desktop Terminal 

User’s Manual

 

Rev. Original 

P/N: 13320900010 

Summary of Contents for DT-308 Series

















Reviews: