A
A
B
EU
USA
Power
Button
Power
Button
Left Scan Key
Speaker
Barcode
Scanner
Scanner LED Indicator
LCD Touchscreen
LCD Touchscreen
Headset
Jack
Battery Cover Locks
SD Card
Slot
SIMM Card
Slot
Keypad
Keypad
Scan
Keys
Scan
Keys
I / O Port
I / O Port
Power Input
Power Input
Quick Start Guide
M4000 Series
Contents
Overview
Installing Memory Cards & the Battery
M4020
M4010
Battery
1. Open the Velcro strap and slide it out
of the unit as shown.
6. Note the locations of the SD Card slot
and the SIMM Card slot.
5. Using a T8 Torx driver, remove the four
screws holding the end cap to the unit.
9. Place the end cap on the unit, insert
the screws into their holes, and tighten
those screws using a T8 Torx driver.
2. Twist the battery cover locks (A) to
unlock the battery cover, then lift the
battery cover (B) off.
4. Replace the cover and twist the locks
closed as shown.
10. Reinsert the Velcro through the unit
bracket and secure.
7. Insert the SD Card into the slot with the
mitered corner to the right as shown and
press in until it locks in place.
8. Insert the SIMM Card into the slot with
the mitered corner to the left as shown
and press in until it locks in place.
3. Insert the battery as shown with the label
side facing up.
11. Insert the AC adapter into the power
input.
12. Insert the power cord into the wall outlet
and charge the battery for a minimum of
6 hours.
Power Cord
Headset
Quick Start Guide
USB Client Cable
AC Adapter
PN: 778-00002 • February 2011
