Chapter2. Bill Recycling Machine (BRM) Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
2-507
Code
Problem Description
Troubleshooting
5Q8HA10
Error GS801B, GS802B during
Retract CSM + TE.
1. Check GS801B, GS802B
2. Operate to initialize BRM(Recovery)
5Q8HA11
Error GS801A, GS801B,
GS802B during Retract CSM +
TE.
1. Check GS801A, GS801B, GS802B
2. Operate to initialize BRM(Recovery)
5Q8HA12
Error GS802A, GS802B
during Retract CSM + TE.
1. Check GS802A, GS802B
2. Operate to initialize BRM(Recovery)
5Q8HA13
Error GS801A, GS802A,
GS802B during Retract CSM +
TE.
1. Check GS801A, GS802A, GS802B
2. Operate to initialize BRM(Recovery)
5Q8HA14
Error GS801B, GS802A,
GS802B during Retract CSM +
TE.
1. Check GS801B, GS802A, GS802B
2. Operate to initialize BRM(Recovery)
5Q8HA15
Error GS801A, GS801B,
GS802A, GS802B during
Retract CSM + TE.
1. Check GS801A, GS801B, GS802A,
GS802B
2. Operate to initialize BRM(Recovery)
5Q8HF03
Error to load shading data of
the CIS during Retract CSM +
TE.
1. Operate shading in the BC CIS
2. Operate to initialize BRM(Recovery)
5Q8HF04
Error to load recognition DB
table during Retract CSM +
TE.
1.Download DB again after delecting all
recognition DB
2. Operate to initialize BRM(Recovery)
5Q8HF05
Error to BC FPGA data
checksum during Retract CSM
+ TE.
1. Check to BC FPGA File
2. Operate to initialize BRM(Recovery)
5Q8HF06
Error to BC FPGA
configuration during Retract
CSM + TE.
1. Re-download BC FPGA
2. Change the BC B/D if continuous
error.
5Q8HF07
Error to load to info of BC
FPGA header during Retract
CSM + TE.
1. Re-download BC FPGA
2. Change the BC B/D if continuous
error.
5Q8HF08
Error to FPGA initialize during
Retract CSM + TE.
1. Re-download BC FPGA
2. Change the BC B/D if continuous
error.
5Q8HF09
Error to FPGA Read during
Retract CSM + TE.
1. Re-download BC FPGA
2. Change the BC B/D if continuous
error.
5Q8HF11
Error to load recognition DB
#01 during Retract CSM + TE.
1.Download DB again after delecting all
recognition DB
2. Operate to initialize BRM(Recovery)
5Q8HF12
Error to load recognition DB
#02 during Retract CSM + TE.
1.Download DB again after delecting all
recognition DB
2. Operate to initialize BRM(Recovery)
5Q8HF13
Error to load recognition DB
#03 during Retract CSM + TE.
1.Download DB again after delecting all
recognition DB
2. Operate to initialize BRM(Recovery)
5Q8HF14
Error to load recognition DB
#04 during Retract CSM + TE.
1.Download DB again after delecting all
recognition DB
2. Operate to initialize BRM(Recovery)
5Q8HF15
Error to load recognition DB
#05 during Retract CSM + TE.
1.Download DB again after delecting all
recognition DB
2. Operate to initialize BRM(Recovery)
5Q8HF16
Error to load recognition DB
#06 during Retract CSM + TE.
1.Download DB again after delecting all
recognition DB
2. Operate to initialize BRM(Recovery)