Nautilus Hyosung MX8800, Руководство пользователя, Страница: 783 / 827

Error Code List Chapter4. Cash & Check In Module
4-230 © 2014 Nautilus Hyosung Inc. All Rights Reserved.
Code Problem Description Troubleshooting
I8F08 [Deposit End]JError occurred by
the Return Transport
Path( BCS02) 1. Open the BC cover(3) and remove the
residual media and alien materials.
2. Check the BC Lock state.
I8F09 [Deposit End]JError occurred by
the Return Transport
Path( BCS01,BCS02) 1. Open the BC cover(3) and remove the
residual media and alien materials.
2. Check the BC Lock state.
I8F0A [Deposit End]JError occurred by
the Return Transport
Path( FDS15) 1. Open the BM4 moving path and then
remove the residual media and alien
materials.
I8F0B [Deposit End]JError occurred by
the Return Transport
Path( AAS06) 1. Open the alignment(4) cover and
remove the residual media and alien
materials.
2. Initialize the device.
3. Check the alignment(4) cover lock
state.
I8F0C [Deposit End]JError occurred by
the Return Transport
Path( AAS05) 1. After opening the BM2(7) moving
path, open the Alignment(4) Guide2 to
remove media and alien materials.
2. Initialize the device.
4. If the same fault continuously occurs
after checking the device, replace the
Alignment(4) Module.
I8F0D [Deposit End]JError occurred by
the Return Transport
Path( AAS03) 1. Open the alignment(4) cover and
remove the residual media and alien
materials.
2. Initialize the device.
3. Check the alignment(4) cover lock
state.
I8F0E [Deposit End]JError occurred by
the Return Transport
Path( RCS01) 1. Remove the internal media and alien
materials in the Recognition(5).
2. Initialize the device.
3. If the same fault continuously occurs
after checking the device, replace the
Recognition(5) Module.
I8F0F [Deposit End]JError occurred by
the Return Transport
Path( FDS07) 1. Open the BM2(7) Upper Guide and
remove the residual media and alien
material.
2. Open the BM3 moving path to remove
the residual media.
I8F10 [Deposit End]JError occurred by
the Return Transport
Path( FDS23) 1. Open the BM2(7) Upper Guide and
remove the residual media and alien
material.
2. Open the BM3 moving path to remove
the residual media.
I8F11 [Deposit End]JError occurred by
the Return Transport
Path( FDS09) 1. Open the BM2(7) and then remove
the residual media and alien materials.
2. Check the 3Way-Gate1 operation
state (FDM06)
I8F12 [Deposit End]JError occurred by
the Return Transport
Path( FDS12) 1. Open the third moving path (8) and
then remove the residual media and
alien materials.
2. Check the 3Way-Gate2 operation
state (FDM07)