Chapter2. Bill Recycling Machine (BRM) Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
2-359
Code
Problem Description
Troubleshooting
5B8HG36
Error of recognized mode
during receiving BCU mode
command in the Retract TE .
1. Check to the recoginzed mode
2. Operate to initialize BRM(Recovery)
3. Reboot the system when same error
occurred (message timeout error) after
initialization
5B8HG37
Error of transaction setting
during receiving BCU mode
command in the Retract TE .
1. Check to the transaction setting
2. Operate to initialize BRM(Recovery)
3. Reboot the system when same error
occurred (message timeout error) after
initialization
5B8R100
BC message timeout error
during operation ready in the
Retract TE.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5B8R200
BC message timeout error
during transation operation in
the Retract TE.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5B8R300
BC message timeout error
during postprocessing to
Retract TE Error.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5B8R900
BC message timeout error
during Retract TE.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5B8S100
Receive abnormal MI from BC
during Retract TE.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5B8S200
Receive abnormal BCC from
BC during Retract TE.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5B8S400
Receive ETC. error from BC
during Retract TE.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5B8S900
Receive retry error from BC
during Retract TE.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5B91300
RJC GSA03 dark jam error
during Retract TE.
1. Open the lower unit
2. Open the Mid Transport Path
3. Open the reject cassette(21)
4. Remove notes and substance in the
reject cassette(21)
5. Check whether the sensor is
contaminated or not if there are No
notes or substance