Chapter2. Bill Recycling Machine (BRM) Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
2-299
Code
Problem Description
Troubleshooting
5A0N900
Pick-up count did not match up
with stack count when
separate end in the Retract
CSM.
1. Operate to initialize BRM(Recovery)
5A0NC00
Failure to check the last note
at the termination of mid
transport path during Retract
CSM.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5A0Q100
UTC removal error during
Retract CSM.
1. Open the upper unit
2. Check removal of the cassette not
received(9)
5A0Q200
TE open error during Retract
CSM.
1. Open the upper Unit
2. Check open/close of TE(12)
5A0Q300
BMU inter lock error during
Retract CSM.
1. Check Load/Removal of the upper
unit
2. Replace a cherry switch when error
occures
5A0Q400
BMU removal error during
Retract CSM.
1. Check Load/Removal of the upper
unit
5A0Q600
CSM open error during Retract
CSM.
1. Open the upper unit
2. Check to open/close CSM
3. Check the sensors GS011
5A0Q700
RJC removal error during
Retract CSM.
1. Open the lower unit
2. Open the Mid Transport Path
3. Check the reject CST(21)
Load/Removal
5A0Q800
BMD inter lock error during
Retract CSM.
1. Check the lower Unit load/removal
2. Replace a cherry switch when error
occures
5A0Q900
BMD removal error during
Retract CSM.
1. Check the lower Unit load/removal
5A0QA00
BC open error during Retract
CSM.
1. Open the upper unit
2. Open the customer service module
(CSM)
3. Check the lock lever in the BC
5A0R100
BM message timeout error
during Retract CSM Ready.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5A0R200
BM message timeout error
during Retract CSM
Transaction.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization
5A0R300
BM message timeout error
during postprocessing to
Retract CSM Error.
1. Operate to initialize BRM(Recovery)
2. Reboot the system when same error
occurred (message timeout error) after
initialization