Error Code Manual Chapter2. Bill Recycling Machine (BRM)
2-16
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
5152200
Error occurred by the notes
remained on GS502 during
Deposit Ready.
1. Open the lower unit.
2. Open the Mid Transport Path.
3. Remove the recycle cassette (E) .
4. Put down the Stage after open the
recycle cassette door (E)
5.Remove notes and substance using
jam removal Knob in the upper side
6. Check whether the sensor is
contaminated or not if there are No
notes or substance
5152500
Error occurred by the notes
remained on GS505 during
Deposit Ready .
1. Open the lower unit.
2. Open the Mid Transport Path.
3. Remove the recycle cassette (E) .
4. Put down the Stage after open the
recycle cassette door (E)
5.Remove notes and substance using
jam removal Knob in the upper side
6. Check whether the sensor is
contaminated or not if there are No
notes or substance
515G100
Failure of return notes to
GS501 during Deposit Ready.
1. Open the lower unit.
2. Open the Mid Transport Path.
3. Remove the recycle cassette (E) .
4. Put down the Stage after open the
recycle cassette door (E)
5.Remove notes and substance using
jam removal Knob in the upper side
6. Check whether the sensor is
contaminated or not if there are No
notes or substance
515G200
RC5 PP stack position
movement failure during
Deposit Ready.
1. Open the lower unit.
2. Open the Mid Transport Path.
3. Remove the recycle cassette (E) .
4. Open the recycle cassette door (E)
5. Check cassette status to move stage
up and down
6. Check to demage lower edge of the
door´s right side(Key part) if you
don´t find any problem
515G400
Failure to upword moving of
PP during RC5 stack roller
retreat movement in the
Deposit Ready.
1. Open the lower unit.
2. Open the Mid Transport Path.
3. Remove the recycle cassette (E) .
4. Open the recycle cassette door (E)
5. Check cassette status to move stage
up and down
6. Check to demage lower edge of the
door´s right side(Key part) if you
don´t find any problem
515G500
Failure of RC5 stack roller
retreat during Deposit Ready.
1. Open the lower unit.
2. Open the Mid Transport Path.
3. Remove the recycle cassette (E) .
4. Put down the Stage after open the
recycle cassette door (E)
5.Check the jam removal knob rotates
softly