background image

 

 

XT-3615/3815 

Fanfree LCD Touch Terminal 

User’s Manual

 

                               Rev.: Original 

 
 
 
 

FCC Notes: 

This equipment generates, uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions manual, may cause interference 
to radio communications. It has been tested and found to comply with limits for a Class 
A digital device pursuant to subpart J of Part 15 of FCC Rules, which are designed to 
provide reasonable protection against interference when being operated in a commercial 
environment. Operation of this equipment in a residential area is likely to cause 
interference in which case the user at his or her own expense will be required to take 
whatever measures to correct the interference. 

Warranty Limits: 

Warranty terminates automatically when any person other than the authorized 
technicians opens the machine. The user should consult his/her dealer for the problem 
having happened. Warranty voids if the user does not follow the instructions in 
application of this merchandise. The manufacturer is by no means responsible for any 
damage or hazard caused by improper application. 

About This Manual: 

Posiflex has made every effort for the accuracy of the content in this manual. However, 
Posiflex Technology, Inc. will assume neither liability for any

 

technical inaccuracies or 

editorial or other errors or omissions contained herein, nor that for direct, indirect, 
incidental, consequential or otherwise damages, including without limitation loss of 
data or profits, resulting from the furnishing, performance, or use of this material.

 

This information is provided “as is” and Posiflex Technology, Inc. expressly disclaims 
any warranties, expressed, implied or statutory, including without limitation implied 
warranties of merchantability or fitness for particular purpose, good title and against 
infringement. 

The information in this manual contains only essential hardware concerns for general 
user and is subject to change without notice. Posiflex Technology, Inc. reserves the 
right to alter product designs, layouts or drivers without notification. The system 
integrator shall provide applicative notices and arrangement for special options utilizing 
this product. The user may find the up-to-date information of the hardware from: 
http://www.posiflex.com or http://www.posiflex.com.tw or http://www.posiflexusa.com. 

A backup of all data should be kept prior to installation of a drive unit or storage 
peripheral. Posiflex will not be responsible for any loss of data resulting from the use, 
disuse or misuse of this or any other Posiflex product. 

P/N: 16780900010 

 

Summary of Contents for XT-3615





















Reviews: