Error Code List Chapter4. Cash & Check In Module
4-162
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
I63FF
[Deposit Cancel]Bundle task force
shutdown.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I6507
[Deposit Cancel]Residual media at
the Escrow entry part (ESS03,
ESS04) when preparing for media
output
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I6508
[Deposit Cancel]Escrow Tape
Start(ESS06) detection fault when
preparing for media output.
1. Open the Escrow part (12) and
remove the ESS06 media and pollution.
2. Rotate the Escrow Knob in clock-wise
three times.
3. Execute CCIM initialization.
I6509
[Deposit Cancel]Residual media at
the Escrow entry part (ESS03,
ESS04) when reset the Escrow
mode
1. Open the Escrow Part(12).
2. Remove the media at the Escrow
Drum residual check (ESS03) and
output check (ESS04) sensor part and
the pollution.
3. Execute CCIM initialization.
I650A
[Deposit Cancel]Residual media at
the Escrow (ESS01, ESS02,
ESS03, ESS04) when reset the
Escrow mode
1. Open the Escrow Part(12).
2. Remove the media residual at the
Escrow (ESS01, ESS02, ESS03,
ESS04) and the pollution.
3. Execute CCIM initialization.
I6516
[Deposit Cancel] Residual
detection (ESS03) Jam before
Escrow Drum when outputting the
media.
1. Open the Escrow Part(12).
2. Remove the ESS03 media and
pollution.
3. Execute CCIM initialization.
I6517
[Deposit Cancel]Light jam at the
Escrow output check sensor
(ESS04) when outputting the
media.
1. Open the Escrow Part(12).
2. Remove the ESS04 media and
pollution.
3. Execute CCIM initialization. 4. Check
the Escrow Drum running motor
(ESM01).
I6518
[Deposit Cancel]Residual media in
the Escrow (ESS01, ESS02) when
preparing for media discharge.
1. Open the Escrow Part(12).
2. Remove the ESS01 and ESS02
media and pollution.
3. Execute CCIM initialization.
I6519
[Deposit Cancel] Escrow Trigger2
(ESS04) is not detected and
timeout occurs when outputting
the media.
1. Open the Escrow Part(12).
2. Remove the ESS04 media and
pollution.
3. Execute CCIM initialization. 4. Check
the Escrow Drum running motor
(ESM01).
I651A
[Deposit Cancel] Residual
detection sensor (ESS03) Jam
before Escrow Drum when
outputting the media.
1. Open the Escrow Part(12).
2. Remove the ESS03 media and
pollution.
3. Execute CCIM initialization.
I651B
[Deposit Cancel]Jam at the
Escrow output check sensor
(ESS04) when outputting the
media.
1. Open the Escrow Part(12).
2. Remove the ESS04 media and
pollution.
3. Execute CCIM initialization.