Chapter4. Cash & Check In Module Error Code Manual
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
4-211
Code
Problem Description
Troubleshooting
I7F19
[Deposit OK]JError occurred by
the Return Transport
Path( FDS19)
1. Remove the residual media at the
Cassette2 entry (11).
2. Execute initialization.
I7F1A
[Deposit OK]JError occurred by
the Return Transport
Path( CCS07)
1. Check residual media or alien
materials at the Cassette2(15) entry and
remove those.
I80C1
[Deposit End] Receives undefined
USB CONTROL command.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I80C2
[Deposit End]A wrong size is
received during USB CONTROL
PIPE communication.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I80C3
[Deposit End]The size of USB bulk
data is 0 or not the multiple of 64.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I80CF
[Deposit End]Fault of transmitting
the same seq of SP.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I8103
[Deposit End]Fault of calling a
undefined command from
Cassette1.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I8104
[Deposit End]Fault of performing a
undefined process flow from
Cassette1.
1. Execute CCIM initialization.
2. Reboot the system when the same
error occurs after initialization.
I8105
[Deposit End]Cassette1 position
or door open fault
1. Check the Cassette1(14) installation
state and door open state.
2. Check Cassette1 home position
(NCS01) sensor connection cable.
I8106
[Deposit End] Fault of causing
retry of moving the Cassette1
Push Plate Bottom position.
1. Check the jam when moving the push
plate left/right/vertically and manually.
2. Check the Cassette1 push plate
motor (NCM01) running and cable
connection.
I8107
[Deposit End]Jam at the sensor
(NCS07) detecting the number of
papers which enter into the
Cassette1.
1. Check residual media or alien
materials at the Cassette1(14) entry and
remove those.
I8108
[Deposit End] Fault of causing
retry of moving the Cassette1
Push Plate Top position.
1. Check the arrangement state of the
banknotes in the Cassette1(14).
2. Check the stack position (NCS06) and
the media entry detection (NCS09) prism
state.
3. If the same fault continuously occurs
after checking the device, replace the
Cassette1(14)
I8109
[Deposit End] Fault of exceeding
the retries when the Cassette1
Clamp failed to move to the
position (NCS08 Light).
1. Check the Cassette1 media guide
motor (NCM02) running and cable
connection.
2. If the same fault continuously occurs
after checking the device, replace the
Cassette1(14)