Nautilus Hyosung MX8800, Руководство пользователя

Страница: 681 / 827

Error Code List Chapter4. Cash & Check In Module
4-128 © 2014 Nautilus Hyosung Inc. All Rights Reserved.
Code Problem Description Troubleshooting
I4E02 [Deposit Count/Check]Error
occurred by the Transport Path on
the FDS02 1. SCM(2) Open
2. Remove the notes and alien materials
in the SCM. and Bundle.
I4E03 [Deposit Count/Check]Error
occurred by the Transport Path on
the FDS03 1. SCM(2) Open
2. Remove the notes and alien materials
in the SCM. and Bundle.
I4E04 [Deposit Count/Check]Error
occurred by the Transport Path on
the FDS04 1. SCM(2) Open
2. Remove the notes and alien materials
in the SCM. and Bundle.
I4E05 [Deposit Count/Check]Error
occurred by the Transport Path on
the FDS05 1. SCM(2) Open
2. Remove the notes and alien materials
in the SCM. and Bundle.
I4E06 [Deposit Count/Check]Error
occurred by the Transport Path on
the FDS03,04 1. SCM(2) Open
2. Remove the notes and alien materials
in the SCM. and Bundle.
I4E07 [Deposit Count/Check]Error
occurred by the Transport Path on
the BCS01 1. Open the BC cover(3) and remove the
residual media and alien materials.
2. Check the BC Lock state.
I4E08 [Deposit Count/Check]Error
occurred by the Transport Path on
the BCS02 1. Open the BC cover(3) and remove the
residual media and alien materials.
2. Check the BC Lock state.
I4E09 [Deposit Count/Check]Error
occurred by the Transport Path on
the BCS01,BCS02 1. Open the BC cover(3) and remove the
residual media and alien materials.
2. Check the BC Lock state.
I4E0A [Deposit Count/Check]Error
occurred by the Transport Path on
the FDS15 1. Open the BM4 moving path and then
remove the residual media and alien
materials.
I4E0B [Deposit Count/Check]Error
occurred by the Transport Path on
the AAS06 1. Open the alignment(4) cover and
remove the residual media and alien
materials.
2. Initialize the device.
3. Check the alignment(4) cover lock
state.
I4E0C [Deposit Count/Check]Error
occurred by the Transport Path on
the AAS05 1. After opening the BM2(7) moving
path, open the Alignment(4) Guide2 to
remove media and alien materials.
2. Initialize the device.
4. If the same fault continuously occurs
after checking the device, replace the
Alignment(4) Module.
I4E0D [Deposit Count/Check]Error
occurred by the Transport Path on
the AAS03 1. Open the alignment(4) cover and
remove the residual media and alien
materials.
2. Initialize the device.
3. Check the alignment(4) cover lock
state.
I4E0E [Deposit Count/Check]Error
occurred by the Transport Path on
the RCS01 1. Remove the internal media and alien
materials in the Recognition(5).
2. Initialize the device.
3. If the same fault continuously occurs
after checking the device, replace the
Recognition(5) Module.