Error Code Manual Chapter2. Bill Recycling Machine (BRM)
2-42
© 2014
Nautilus Hyosung Inc.
All Rights Reserved.
Code
Problem Description
Troubleshooting
520DV00
Error of failure to synchronizing
recognition during Deposit
Count .
1. Operate to initialize BRM(Recovery)
520DW00
Error of failure to synchronizing
recognition during Deposit
Count .
1. Operate to initialize BRM(Recovery)
520DX00
Error of failure to synchronizing
recognition during Deposit
Count .
1. Operate to initialize BRM(Recovery)
520DY00
Error of failure to synchronizing
recognition during Deposit
Count .
1. Operate to initialize BRM(Recovery)
520DZ00
Excessive Reject error of
Denominatinon Limitation
Deposit Count.
Return the Notesto customer(Semi OK
Code)
520F100
GM001 motor removal error
during Deposit Count.
1. Open the upper unit
2. Check the Front Transport Path(4)
knob rotates softly
3.Check remained Notes and substance
in the upper Transport Path
4. Check the GS804 Sensor
520F200
GM002 motor removal error
during Deposit Count.
1. Open the upper unit
2. Check the Rear Transport Path(8)
knob rotates softly
3.Check remained Notes and substance
in the upper Transport Path
4. Check the GS007 Sensor
520F500
Decreased encoder count of
GM001 moter less than
previous values during Deposit
Count.
1. Operate to initialize BRM(Recovery)
520F600
Decreased encoder count of
GM002 moter less than
previous values during Deposit
Count.
1. Operate to initialize BRM(Recovery)
520F700
Decreassed encoder count of
GM004 moter less than
previous values during Deposit
Count.
1. Operate to initialize BRM(Recovery)
520G100
Failure to 3 Way Gate 0
degree mode conversion
during Deposit Count during
Deposit Count.
1. Open the upper unit
2. Open the CSM and TE(12)
3. Remove notes and substance from
the gate in the Rear Transport Path
520G200
Failure to 3 Way Gate 120
degree mode conversion
during Deposit Count during
Deposit Count.
1. Open the upper unit
2. Open the CSM and TE(12)
3. Remove notes and substance from
the gate in the Rear Transport Path
520K100
Erro of failure to duplicate
serial number during Deposit
Count
1. Check the duplicate note and remove
the note.
2. Operate to initialize BRM(Recovery)