background image

 

 

 

[AX3000] USR-005  

2012-09-28 

 

……..….. 

AX-3000 

series

 

Users Manual 

……..….. 

 
 
 
 
 
 
 
 

 

THE SOCKET-OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND 
SHALL BE EASILY ACCESSIBLE. 
 
LA PRISE DOIT ETRE PRES DE L'APPAREIL ET FACILE D'ACCES. 
 

Note:  This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential installation. This equipment generates, uses 
and can radiate radio frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the interference by one or more of the 
following measures: 

-- Reorient or relocate the receiving antenna. 
-- Increase the separation between the equipment and receiver. 
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 
-- Consult the dealer or an experienced radio/TV technician for help. 

!

Summary of Contents for AX-3000 series













Reviews: