Cypress S6J3200 Series, Manual

Page: 1208 / 1355

CHAPTER 33:Graphics Subsystem
S6J3200 Series Hardware Manual Document Number: 002-04852 Rev. *G 1207
4.2.
SubSysCtrl
In this section, the SubSysCtrl registers are described.
4.2.1.
Address Block 0
 LockUnlock
REGISTER_NAME LockUnlock
OFFSET 0x10x0
ACCESS_SIZE W
MULTIPLE
NUMERIC_TYPE
OTHER
Register to change the protection status of the address block 0.
When lock protection is active, no write but only read access is possible to all registers of this address
block. When privilege protection is active, only privileged read and write access is possible. Both
protections can be active at the same time.
BIT_OFFSET 31 30 29 28 27 26 25 24
BIT_NAME LockUnlock[31:24]
ACCESS_TYPE RX,W
PROT_TYPE WpL
INITIAL_VALUE
- - - - - - - -
BIT_OFFSET 23 22 21 20 19 18 17 16
BIT_NAME LockUnlock[23:16]
ACCESS_TYPE RX,W
PROT_TYPE WpL
INITIAL_VALUE
- - - - - - - -
BIT_OFFSET 15 14 13 12 11 10 9 8
BIT_NAME LockUnlock[15:8]
ACCESS_TYPE RX,W
PROT_TYPE WpL
INITIAL_VALUE
- - - - - - - -
BIT_OFFSET 7 6 5 4 3 2 1 0
BIT_NAME LockUnlock[7:0]
ACCESS_TYPE RX,W
PROT_TYPE WpL
INITIAL_VALUE
- - - - - - - -