Cypress S6J3200 Series, Manual

Page: 396 / 1355

CHAPTER 16:Stepper Motor Controller
S6J3200 Series Hardware Manual Document Number: 002-04852 Rev. *G 395
Bits Description
000 "L": PWM1P output is fixed to low level
001 "H": PWM1P output is fixed to high level
01X PWM pulse is driven on the PWM1P output
1XX "Hi-Z": PWM1P output is set to high impedance
X: don't care
Note:
− If the PWS.BS bit is "1" , don't change the PWM Compare Register.Compare Data Value(PWC1.D[9.0],
PWC2.D[9:0]) and the PWM Selection Register.Output Selection bits (PWS.P2[2:0], PWS.M2[2:0],
P1[2:0], PWS.M1[2:0]).
[bit2:0] M1[2:0]: Minus Output 1 Selection bits
The M1[2:0] bits selects the output signal for PWM1M.
Bits Description
000 "L": PWM1M output is fixed to low level
001 "H": PWM1M output is fixed to high level
01X PWM pulse is driven on the PWM1M output
1XX "Hi-Z": PWM1M output is set to high impedance
X: don't care
Note:
−
If the PWS.BS bit is "1" , don't change the PWM Compare Register.Compare Data
Value(PWC1.D[9:0], PWC2.D[9:0]) and the PWM Selection Register.Output Selection bits
(PWS.P2[2:0], PWS.M2[2:0], PWS.P1[2:0], M1[2:0]).