Cypress S6J3200 Series, Manual

Page: 37 / 1355

CHAPTER 2:Function List
36 S6J3200 Series Hardware Manual Document Number: 002-04852 Rev. *G
2.2.
ID
ID is specified for each function digit and revision which is defined at Figure 2-1 through 2-3. Chip ID can
be read from SYSC0_SYSIDR. For SYSC0_SYSIDR, see the Traveo
TM
Platform hardware manual.
Graphic subsystem ID can be read from IPIdentifier register on graphic subsystem. See the chapter
Graphic Subsystem.
Function
Digit
Option Revision Chip ID JTAG ID Platform ID
Graphic
subsystem
3, 4, 5, 6,
7, 8, 9
S and U
A 0x10100000 0x100085CF 0x00110200 N/A
B
- - - -
C and D 0x10100100 0x1000C5CF 0x00110200 N/A
E and F 0x10100101 0x1000C5CF 0x00110200 0x23443420
H 0x10100102 0x1000C5CF 0x00110200 0x23443470
J 0x10100103 0x1000C5CF 0x00110200 0x23443480
M 0x10100104 0x1000C5CF 0x00110200 0x23443490
P 0x10100104 0x1000C5CF 0x00110200 0x23443490
B S
A
- - - -
B 0x10110000 0x100095CF 0x00110200 N/A
C and D
- - - -
E 0x10110002 0x100095CF 0x00110200 0x23442450
K S
M 0x10170000
0x002705CF
0x00110200 0x23443490
L S 0x002715CF
M S 0x002725CF
N S 0x002735CF
2.3.
Restriction
Some functions have restrictions which depend on package pin counts.
Table 2-4
Function TEQFP256 TEQFP216 TEQFP208
Analog input port (12bit-ADC)
AN0 to AN49
(50 ports)
AN0 to AN49
(50 ports)
AN1 to AN3, AN5 to AN17,
AN20 to AN49
(46 ports)
SEG port of LCD controller
SEG0 to SEG31
(32 ports)
SEG0 to SEG31
(32 ports)
SEG0 to SEG29
(30 ports)