Cypress S6J3200 Series, Manual

Page: 1031 / 1355

CHAPTER 27:HyperBus Interface
1030 S6J3200 Series Hardware Manual Document Number: 002-04852 Rev. *G
4.7.
General Purpose Output Register (HYPERBUSIn_GPOR)
HYPERBUSI_GPOR is used in order to control the GPIO signals polarity.
REGISTER_NAME HYPERBUSIn_GPOR
OFFSET 0x40
ACCESS_SIZE B H W
MULTIPLE
NUMERIC_TYPE
OTHER
Table 4-7 HYPERBUSI General Purpose Output Register Description
BIT_OFFSET 31 30 29 28 27 26 25 24
BIT_NAME RFU RFU RFU RFU RFU RFU RFU RFU
ACCESS_TYPE R0,WX R0,WX R0,WX R0,WX R0,WX R0,WX R0,WX R0,WX
PROT_TYPE
-
INITIAL_VALUE 0 0 0 0 0 0 0 0
BIT_OFFSET 23 22 21 20 19 18 17 16
BIT_NAME RFU RFU RFU RFU RFU RFU RFU RFU
ACCESS_TYPE R0,WX R0,WX R0,WX R0,WX R0,WX R0,WX R0,WX R0,WX
PROT_TYPE
-
INITIAL_VALUE 0 0 0 0 0 0 0 0
BIT_OFFSET 15 14 13 12 11 10 9 8
BIT_NAME RFU RFU RFU RFU RFU RFU RFU RFU
ACCESS_TYPE R0,WX R0,WX R0,WX R0,WX R0,WX R0,WX R0,WX R0,WX
PROT_TYPE
-
INITIAL_VALUE 0 0 0 0 0 0 0 0
BIT_OFFSET 7 6 5 4 3 2 1 0
BIT_NAME RFU RFU RFU RFU RFU RFU GPO[1] GPO[0]
ACCESS_TYPE R0,WX R0,WX R0,WX R0,WX R0,WX R0,WX R/W R/W
PROT_TYPE
-
INITIAL_VALUE 0 0 0 0 0 0 0 0
[bit31:2] RFU : Reserved for Future Use
When writing this register, this bit should be set to 0 for future compatibility. When reading this register,
this bit is 0 for future compatibility.
[bit1:0] GPO[1:0] : General Purpose Output Interface
The signal polarity that is outputted to the general purpose output interface is set up.
Bit Description
0 Output signal polarity is LOW
1 Output signal polarity is HIGH