CHAPTER 18:Sound Generator
454
S6J3200 Series Hardware Manual Document Number: 002-04852 Rev. *G
4.7.
Increase and Decrease Data Register (SGIDR)
The Increase and Decrease Data Register (SGIDR) stores the increment or decrement for the Amplitude
Data Register (SGIDR).
bit
7
6
5
4
3
2
1
0
Field
SGIDR[7:0]
Attribute
R/W
Initial value
0x00
[bit7:0] SGIDR : Increase and decrease data bits
These bits store the increment or decrement for the Amplitude Data Register (SGAR) ,
and the value is written either in the following ways.
(1)Software writes a value to this register.
(2)DMAC writes a value through DMA Transfer Intermediate Register (SGDMAR).
Note:
−
During operation, in the case of changing a register value, meet the following either conditions.
(1)Sound generator is in the stop state (SGCR.BUSY="0").
(2)The changing comes between an interrupt occurrence and falling edge of the first tone pulse.
(The limit time = (Frequency Data Register [SGFR] + 1) x 1 PWM cycle)
When it meets neither condition, the sound output cannot guarantee the expected duty ratio.
Summary of Contents for S6J3200 Series
