background image

Data Sheet 

T 8313 EN

Edition August 2016

Fig. 1: 

Type 3372 Actuator with integrated 

i/p converter mounted onto 

Type 3321 Valve

Fig. 2: 

Type 3372 Actuator · 120 cm² 

actuator area · With 

Type 3725 Positioner (direct 

attachment)

Fig. 3: 

Type 3372 Actuator · 350 cm² 

actuator area · With 

Type 3725 Positioner (direct 

attachment)

Fig. 4: 

Type 3372 Actuator (120 cm²) with additional 

Type 4744‑2 Limit Switch

The Type 3372 Electropneumatic Actuator is available in the 
following versions:

 

Version 

with integrated i/p converter

120 cm²

 actuator 

area and 15 mm rated travel (Fig. 1)

 

Version 

with Type 3725 Positioner (direct attachment), 

120 cm² 

actuator area and 15 mm rated travel (Fig. 2)

 

Version 

with Type 3725 Positioner (direct attachment), 

350 cm² 

actuator area and 15 or 30 mm rated travel 

(Fig. 3)

The actuators are suitable for attachment to Series V2001 
Valves (e.g. Type 3321, Type 3323, Type 3531, Type 3535) 
as well as Type 3214 and Type 3260 Valves. The actuators 
mainly consist of two diaphragm cases, a rolling diaphragm 
and internal springs. The Type 3372 Electropneumatic Actua

-

tor is controlled by a 4 to 20 mA signal. For throttling service, 
an i/p converter is integrated into the actuator or a Type 3725 
Positioner is mounted to the rod-type yoke using a support ele

-

ment.

Further versions

 

Permissible operating temperatures from –35 to +90 °C

  

Only when a positioner is mounted

 

Mechanically adjustable limit stop

 · Only when a posi

-

tioner is mounted and for 120 cm² actuators

 

Handwheel

 · Only when a positioner is mounted and for 

120 cm² actuators

 

Explosion protection

 for a mounted Type 3725 Positioner

 

II 2G Ex ia IIC T4 according to ATEX, intrinsically safe 
Ex ia IIC T4 according to CSA Group, 1Ex ia IIC T4 Gb X 
according to GOST

Accessories

 

Type 4744‑2 Limit Switch

 (Fig. 4) · With explosion protec

-

tion II 2G Ex db IIC T6-T5 and degree of protection IP 66

 

A clamping plate can be used to mount it · See Data Sheet 

u

 T 8367

Type 3372 Electropneumatic Actuator

Application

Electropneumatic linear actuators for attachment to Type 3214 
and Type 3260 Valves as well as Series V2001 Valves

Rated travel

15 and 30 mm

Actuator area

120 and 350 cm²

Summary of Contents for 3372









Reviews: