Cypress S6J3200 Series, Manual

Page: 349 / 1355

CHAPTER 15:12-/10-/8-bit Analog to Digital Converter
348 S6J3200 Series Hardware Manual Document Number: 002-04852 Rev. *G
5.21.
Range Comparator Over Threshold Flag Registers
(ADC12Bn_RCOTF0 to 1)
The flag bits (ADC12B_RCOTF0 to 1) are set when the result of the range comparator is "outside range"
and the converted value is above the value of the upper threshold register.
REGISTER_NAME ADC12Bn_RCOTFi (i = 0 to 1)
OFFSET i*4
ACCESS_SIZE B H W
MULTIPLE 0:1
NUMERIC_TYPE
-
OTHER
-
5.21.1.
Range Comparator Over Threshold Flag Register
(ADC12Bn_RCOTF0)
BIT_OFFSET 31 30 29 28 27 26 25 24
BIT_NAME RCOTF31 RCOTF30 RCOTF29 RCOTF28 RCOTF27 RCOTF26 RCOTF25 RCOTF24
ACCESS_TYPE R,WX R,WX R,WX R,WX R,WX R,WX R,WX R,WX
PROT_TYPE
INITIAL_VALUE 0 0 0 0 0 0 0 0
BIT_OFFSET 23 22 21 20 19 18 17 16
BIT_NAME RCOTF23 RCOTF22 RCOTF21 RCOTF20 RCOTF19 RCOTF18 RCOTF17 RCOTF16
ACCESS_TYPE R,WX R,WX R,WX R,WX R,WX R,WX R,WX R,WX
PROT_TYPE
INITIAL_VALUE 0 0 0 0 0 0 0 0
BIT_OFFSET 15 14 13 12 11 10 9 8
BIT_NAME RCOTF15 RCOTF14 RCOTF13 RCOTF12 RCOTF11 RCOTF10 RCOTF9 RCOTF8
ACCESS_TYPE R,WX R,WX R,WX R,WX R,WX R,WX R,WX R,WX
PROT_TYPE
INITIAL_VALUE 0 0 0 0 0 0 0 0
BIT_OFFSET 7 6 5 4 3 2 1 0
BIT_NAME RCOTF7 RCOTF6 RCOTF5 RCOTF4 RCOTF3 RCOTF2 RCOTF1 RCOTF0
ACCESS_TYPE R,WX R,WX R,WX R,WX R,WX R,WX R,WX R,WX
PROT_TYPE
INITIAL_VALUE 0 0 0 0 0 0 0 0
[bit31:0] RCOTF31 to 0 : Range Comparator Over Threshold flags
The flag is only applicable in "outside range" mode i.e. while the RCINVSEL bit in the corresponding
ADC12Bn_CHCTRL0 to 31 register is "0". If a range comparator interrupt is signaled (corresponding
bits ADC12Bn_RCIRQ0.RCIRQ31 to 0 = ADC12Bn_CHSTAT0 to 31.RCIRQ = "1"), this flag has the
following meaning: