Cypress S6J3200 Series, Manual

Page: 405 / 1355

CHAPTER 17:Trigger Configuration of Stepper Motor Controller
404 S6J3200 Series Hardware Manual Document Number: 002-04852 Rev. *G
[bit3] S13 : Trigger Enable for Operation of SMC<6*g+3>
This bit selects SMC<6*g+3> for the SMC trigger group S1 (triggered by SMCTGg_PTRG:TR1).
Bit Description
0 SMC<6*g+3> is not triggered by SMCTGg_PTRG:TR1
1 SMC<6*g+3> is triggered by SMCTGg_PTRG:TR1
[bit2] S12 : Trigger Enable for Operation of SMC<6*g+2>
This bit selects SMC<6*g+2> for the SMC trigger group S1 (triggered by SMCTGg_PTRG:TR1).
Bit Description
0 SMC<6*g+2> is not triggered by SMCTGg_PTRG:TR1
1 SMC<6*g+2> is triggered by SMCTGg_PTRG:TR1
[bit1] S11 : Trigger Enable for Operation of SMC<6*g+1>
This bit selects SMC<6*g+1> for the SMC trigger group S1 (triggered by SMCTGg_PTRG:TR1).
Bit Description
0 SMC<6*g+1> is not triggered by SMCTGg_PTRG:TR1
1 SMC<6*g+1> is triggered by SMCTGg_PTRG:TR1
[bit0] S10 : Trigger Enable for Operation of SMC<6*g+0>
This bit selects SMC<6*g+0> for the SMC trigger group S1 (triggered by SMCTGg_PTRG:TR1).
Bit Description
0 SMC<6*g+0> is not triggered by SMCTGg_PTRG:TR1
1 SMC<6*g+0> is triggered by SMCTGg_PTRG:TR1