Cypress S6J3200 Series, Manual

Page: 351 / 1355

CHAPTER 15:12-/10-/8-bit Analog to Digital Converter
350 S6J3200 Series Hardware Manual Document Number: 002-04852 Rev. *G
5.21.2.
Range Comparator Over Threshold Flag Register
(ADC12Bn_RCOTF1)
BIT_OFFSET 31 30 29 28 27 26 25 24
BIT_NAME RCOTF63 RCOTF62 RCOTF61 RCOTF60 RCOTF59 RCOTF58 RCOTF57 RCOTF56
ACCESS_TYPE R,WX R,WX R,WX R,WX R,WX R,WX R,WX R,WX
PROT_TYPE
INITIAL_VALUE 0 0 0 0 0 0 0 0
BIT_OFFSET 23 22 21 20 19 18 17 16
BIT_NAME RCOTF55 RCOTF54 RCOTF53 RCOTF52 RCOTF51 RCOTF50 RCOTF49 RCOTF48
ACCESS_TYPE R,WX R,WX R,WX R,WX R,WX R,WX R,WX R,WX
PROT_TYPE
INITIAL_VALUE 0 0 0 0 0 0 0 0
BIT_OFFSET 15 14 13 12 11 10 9 8
BIT_NAME RCOTF47 RCOTF46 RCOTF45 RCOTF44 RCOTF43 RCOTF42 RCOTF41 RCOTF40
ACCESS_TYPE R,WX R,WX R,WX R,WX R,WX R,WX R,WX R,WX
PROT_TYPE
INITIAL_VALUE 0 0 0 0 0 0 0 0
BIT_OFFSET 7 6 5 4 3 2 1 0
BIT_NAME RCOTF39 RCOTF38 RCOTF37 RCOTF36 RCOTF35 RCOTF34 RCOTF33 RCOTF32
ACCESS_TYPE R,WX R,WX R,WX R,WX R,WX R,WX R,WX R,WX
PROT_TYPE
INITIAL_VALUE 0 0 0 0 0 0 0 0
[bit31:0] RCOTF63 to 32 : Range Comparator Over Threshold flags
The flag is only applicable in "outside range" mode i.e. while the RCINVSEL bit in the corresponding
ADC12Bn_CHCTRL32 to 63 register is "0". If a range comparator interrupt is signaled (corresponding
bits ADC12Bn_RCIRQ1.RCIRQ63 to 32 = ADC12Bn_CHSTAT32 to 63.RCIRQ = "1"), this flag has the
following meaning:
Bit Description
0 The conversion result is less than or equal to the upper threshold.
1 The conversion result is above the upper threshold.
This bit is updated only in the case the corresponding interrupt flag (ADC12Bn_RCIRQ1.RCIRQ,
ADC12Bn_CHSTAT32 to 63.RCIRQ) has a rising edge.
This bit is identical to the RCOTF bit in the corresponding ADC12Bn_CHSTAT32 to 63 register.