CHAPTER 22:Media Local Bus Interface (MediaLB)
870
S6J3200 Series Hardware Manual Document Number: 002-04852 Rev. *G
only.
Write "1" to clear this bit. Writing "0" has no effect.
Once set, this bit holds until it is cleared by software.
[bit0] STS : STS[0] : Current Buffer Protocol Error bit
This bit indicates that either a transmit channel has detected an RxStatus of ReceiverProtocolError (0x72),
a receive channel has detected an invalid command for a given channel type, or an additional
ControlStart (0x30) or AsyncStart (0x20) command has been received while in the middle of a packet.
The setting of this bit generates a maskable channel interrupt to the system software. This bit is valid for
all RX channel types and valid for only asynchronous and control TX channels.
Write "1" to clear this bit. Writing "0" has no effect.
Once set, this bit holds until it is cleared by software.
Summary of Contents for S6J3200 Series
