Cypress S6J3200 Series, Manual

Page: 1336 / 1355

CHAPTER 37:Major Changes
S6J3200 Series Hardware Manual Document Number: 002-04852 Rev. *G 1335
Summary
E
rror
P
age
Error
C
orre
ct
P
age
Correct ID
Output Drive
Capacity
213-
215
PORT NO. Remarks
P0_26
P0_27
P4_10
P4_11 *2-2
P5_10
P5_11 *2-2
P5_18
P5_19
P4_30
P4_31
222-
224
PORT NO. Remarks
P0_26 *2-2
P0_27 *2-2
P4_10 *2-2 only for Revision D
P4_11 *2-2 only for Revision D
P5_10 *2-2 only for Revision D
P5_11 *2-2 only for Revision D
P5_18 *2-2 only for Revision D
P5_19 *2-2 only for Revision D
P4_30 *2-2
P4_31 *2-2
#266
Multiple
assign with
POF
215 - 227 3.7 Function Port Group #163
Note on I2C
port
configuration
(No-spec
change)
215
−
*1 When the PPC_PCFGR:POF[2:0]
value setting is "2"(the RSDS function
setting),
If setting to "0" the value of the
PPC_PCFGR:ODR[0], the drive capacity
will be 2mA.
If setting to "1" the value of
PPC_PCFGR:ODR[0], The drive capacity
will be 4mA.
−
*2-1 When the PPC_PCFGR:POF[2:0]
value setting is "4"(SDA or SCL function
setting), regardless of the value of the
PPC_PCGR:ODR[1:0], the drive capacity
will be "I2C".Then, the port status is to be
Pseudo Open Drain, and IOL is to be
3mA.
−
*2-2 When the PPC_PCFGR:POF[2:0]
value setting is "4"(SDA or SCL function
setting), the port status is to be Pseudo
Open Drain, and IOL is to be the
configured value for ODR.
225
- *1 If PPC_PCFGR:POF[2:0] = "2"(the
RSDS function setting) and
PPC_PCFGR:ODR[0] = "0", the drive
capacity will be 2mA.
If PPC_PCFGR:POF[2:0] = "2"(the
RSDS function setting) and
PPC_PCFGR:ODR[0] = "1", the drive
capacity will be 4mA.
−
*2-1 If the PPC_PCFGR:POF[2:0] is
configured as SDA or SCL function, the
pin is set to "Pseudo Open Drain" and IOL
is set to 3mA ("I2C" function) -
independent of the corresponding
PPC_PCGR:ODR[1:0] setting.
−
*2-2 If the PPC_PCFGR:POF[2:0] is
configured as SDA or SCL function, the
pin is set to "Pseudo Open Drain". IOL is
configured by the corresponding
PPC_PCGR:ODR[1:0] register.
#174