Cypress S6J3200 Series, Manual

Page: 338 / 1355

CHAPTER 15:12-/10-/8-bit Analog to Digital Converter
S6J3200 Series Hardware Manual Document Number: 002-04852 Rev. *G 337
5.17.2.
A/D Channel Trigger Status Flag Register (ADC12Bn_TRGST1)
BIT_OFFSET 31 30 29 28 27 26 25 24
BIT_NAME TRGST63 TRGST62 TRGST61 TRGST60 TRGST59 TRGST58 TRGST57 TRGST56
ACCESS_TYPE R,WX R,WX R,WX R,WX R,WX R,WX R,WX R,WX
PROT_TYPE
INITIAL_VALUE 0 0 0 0 0 0 0 0
BIT_OFFSET 23 22 21 20 19 18 17 16
BIT_NAME TRGST55 TRGST54 TRGST53 TRGST52 TRGST51 TRGST50 TRGST49 TRGST48
ACCESS_TYPE R,WX R,WX R,WX R,WX R,WX R,WX R,WX R,WX
PROT_TYPE
INITIAL_VALUE 0 0 0 0 0 0 0 0
BIT_OFFSET 15 14 13 12 11 10 9 8
BIT_NAME TRGST47 TRGST46 TRGST45 TRGST44 TRGST43 TRGST42 TRGST41 TRGST40
ACCESS_TYPE R,WX R,WX R,WX R,WX R,WX R,WX R,WX R,WX
PROT_TYPE
INITIAL_VALUE 0 0 0 0 0 0 0 0
BIT_OFFSET 7 6 5 4 3 2 1 0
BIT_NAME TRGST39 TRGST38 TRGST37 TRGST36 TRGST35 TRGST34 TRGST33 TRGST32
ACCESS_TYPE R,WX R,WX R,WX R,WX R,WX R,WX R,WX R,WX
PROT_TYPE
INITIAL_VALUE 0 0 0 0 0 0 0 0
[bit31:0] TRGST63 to 32 : A/D Channel Trigger Status flags
Bit Description
0 No conversion request.
1 Conversion request is issued.
This bit is set if any conversion request, dedicated to the corresponding logical channel, occurs
(software, hardware, trigger by completion of preceding channel or idle trigger). Moreover, the bit is set
if:
−
The group of the corresponding logical channel is interrupted just before a channel configured as
"restart" channel (ADC12Bn_CHCTRL32 to 63.RSMRST = "10")
−
The channel is the start channel of the group or the last already converted channel configured as
"resume" channel (ADC12Bn_CHCTRL32 to 63.RSMRST = "01").
This bit is cleared under one of the following conditions:
−
Completion of the logical channel conversion, at the same time the conversion done interrupt flag is
set
−
The corresponding group processing is interrupted just before the conversion of this channel is
started and the channel is not configured as "resume" channel (ADC12Bn_CHCTRL32 to
63.RSMRST = "01"). Instead, the group interrupted interrupt flag is set