Cypress S6J3200 Series, Manual

Page: 1328 / 1355

CHAPTER 37:Major Changes
S6J3200 Series Hardware Manual Document Number: 002-04852 Rev. *G 1327
1.
Supplementary Information
All the changes between previous and current document edition are described in this sheet.
Following "ID" is a number which is owned by every change. A change which is applied to other
documents of same family should have a same ID.
Summary
E
rror
P
age
Error
C
orre
ct
P
age
Correct ID
Rev. 1.0 October 14, 2014
Initial release
Original document code: MN708-00005-2v0-E, Previous document code: MN708-00005-1v0-E
Rev. 2.0 May 20, 2015
Display
output
25
Number of display outputs:
2 outputs simultaneously
Selectable from 2 x DRGB, 1 x RSDS, or
1 x LVDS (FPD-Link)
29
Number of display outputs:
Option
Maximum 2 outputs simultaneously
#210
Display
output
27
Notes;
- ,,,,
- ,,,,
32
Notes;
- ,,,,
- ,,,,
−
Display Output ch.0 is used for RSDS
and FPD-LINK (LVDS) as well as DRGB
(Digital RGB). The ch.0 of the product
which doesn’t support FPD-LINK is used
for RSDS and DRGB. Display Output ch.1
is used for DRGB only.
#211
Revision B
description
27
Note:
- ,,,
- The function digit A, B, C, and D
supports Hyper SRAM. Its 3, 4, 5, and 6
doesn’t support Hyper SRAM. Hyper Bus
interface ch.2 on graphic sub system will
be embedded on product which is
specified with function digit 7and 8 after
revision B. Revision A only has ch.0 and 1
of Hyper Bus interface.
32
Note:
- ,,,
- HyperBus Interface ch.1 of the function
digit 3, 4, 5, and 6 support HyperRAM
after Revision B.
#267
TEQFP256
support
27 Pin count N:320 31 Pin count M:256 #272
Revision
description
27 - 31
(Inside Figure 2-1: Option and Part
Number)
C: Support MCAN 3.0.1.
D: Support MCAN 3.2.
#313
Chip Select
Output
27 - 32
(Part Number is added to show Chip
Select Output of MFS)
#346