Cypress S6J3200 Series, Manual

Page: 1340 / 1355

CHAPTER 37:Major Changes
S6J3200 Series Hardware Manual Document Number: 002-04852 Rev. *G 1339
Summary
E
rror
P
age
Error
C
orre
ct
P
age
Correct ID
FPD-Link
internal signal
869,
870,
871
30:RSEL2:R/W,29:RSEL1:R/W,28:RSEL
0:R/W,24:VRM:R/W,9:DLY4-1:R/W,8:DL
Y4-0:R/W,7:DLY3-1:R/W,6:DLY3-0:R/W,
5:DLY2-1:R/W,4:DLY2-0:R/W,3:DLY1-1:
R/W,2:DLY1-0:R/W,1:DLY0-1:R/W,0:DLY
0-0:R/W[bit31] Reserved Always write "0"
to this bit. The read value is "0".[bit30:28]
RSEL[bit27:25] Reserved Always write "0"
to this bit. The read value is "0".[bit24]
VRM,,,[bit15:10] ReservedAlways write
"0" to this bit. The read value is "0".[bit9:8]
DLY4[1:0] : Delay for TX4 ch[bit7:6]
DLY3[1:0] : Delay for TX3 ch[bit5:4]
DLY2[1:0] : Delay for TX2 ch[bit3:2]
DLY1[1:0] : Delay for TX1 ch[bit1:0]
DLY0[1:0] : Delay for TX0 ch
1122,
1123
30:Reserved:R0,W0,29:Reserved:R0,W0,
28:Reserved:R0,W0,24:Reserved:R0,W0,
9:Reserved:R0,W0,8:Reserved:R0,W0,7:
Reserved:R0,W0,6:Reserved:R0,W0,5:R
eserved:R0,W0,4:Reserved:R0,W0,3:Res
erved:R0,W0,2:Reserved:R0,W0,1:Reser
ved:R0,W0,0:Reserved:R0,W0[bit31:28]
Reserved Always write "0" to this bit. The
read value is "0".[bit27:24] Reserved
Always write "0" to this bit. The read value
is "0".,,,[bit15:0] ReservedAlways write "0"
to this bit. The read value is "0".
#343
The
restriction for
the accesses
by the 2D / 3D
Graphics
Cores
944 - 1194
3.2.4 The restriction for the accesses by
the 2D / 3D Graphics Cores
#337
Port definition
of base timer
1030 - 1281
(New chapter Base time port definition is
added.)
#149
Port state
under reset
and PSS
1030 - 1287
(Appendix Pin Status in Each CPU State
is added)
#162
Original document code: MN708-00005-3v0-E, Previous document code: MN708-00005-2v0-E
Rev. 3.0 June 30, 2015
Software
watchdog
location
50 (Software Watchdog in PD1) 50 (Delete) #220
MCU
Configuration
Clock
55 MCU Configuration: SSCG0 55 MCU Configuration: SSCG0/PLL0 #356
Description
for "Source
Clock - Local
Clock List"
56 - 56
The relation between source clock and
local clock in product-specific functions is
as follows.
#398
Link error 56, 57
(Unnecessary link exists in the column of
clock name)
56
(Delete the link from column of clock
name)
#386