Cypress S6J3200 Series, Manual

Page: 1330 / 1355

CHAPTER 37:Major Changes
S6J3200 Series Hardware Manual Document Number: 002-04852 Rev. *G 1329
Summary
E
rror
P
age
Error
C
orre
ct
P
age
Correct ID
Clock
Supervisor
output
function
33 - 39
Clock Supervisor: See the platform
manual in detail.
This product series doesn’t support clock
supervisor output port. (Related register
and internal circuit is implemented.)
#224
Watchdog
Counter
Monitor
33
Hardware watchdog: Hardware watchdog
function stops during PSS mode.,,,
39
Hardware watchdog: ,,,Hardware
watchdog function stops during PSS
mode. In the related register of
HWDG_CFG, the bit ALLOWSTOPCLK is
always read as 1
(HWDG_CFG.ALLOWSTOPCLK=1).The
product series doesn’t support Watchdog
Counter Monitor Output port. (Related
register and internal circuit is
implemented.)Software watchdog:See the
platform manual in detail.The product
series doesn’t support Watchdog Counter
Monitor Output port. (Related register and
internal circuit is implemented.)
#225
MPU lock and
unlock value
34 - 40
To configure Lock or Unlock for both
MPUXn_UNLOCK and
MPUHn_UNLOCK,
- Lock: 0x112ABB56
- Unlock: 0xACCABB56
#351
TEQFP256
support
35
A/D Converter:
50 channels of analog input for
TEQFP216
,,,
24 channels of them are shared with the
SMC for TEQFP216/208
41
A/D Converter:
50 channels of analog input for
TEQFP256 and TEQPF216
,,,
24 channels of them are shared with the
SMC for TEQFP256/216/208
#274
TEQFP256
support
37
TEQFP216 : 4com x 32seg
TEQFP208 : 4com x 30seg
,,,
43
TEQFP256 : 4com x 32seg
TEQFP216 : 4com x 32seg
TEQFP208 : 4com x 30seg
,,,
#275
HyperBus
GPO Remark
37
HyperBus
,,,
42
HyperBus
,,,
GPO signal can only be used for "Internal
Control example by GPO" in this product,
that is, it can select using HyperBus of PF
or using HyperBus of Graphic Sub
System.
#345