CHAPTER 7:Memory and Base Address Map
S6J3200 Series Hardware Manual Document Number: 002-04852 Rev. *G
73
3.
Note
When MPU attribute of Cortex-R5F is configured as "Normal", store buffer inside Cortex-R5F can operate
and write data can be merged. To avoid influence of this data merger, MPU attribute "Device" or "Strongly
Ordered" should be used.
MPU attribute "Device" or "Strongly Ordered" must be used for areas below, to avoid this influence.
−
Backup RAM area (BACKUP_RAM) [0E80_0000 to 0E87_FFFF]
−
Peripheral area (Peri area) [B000_0000 to B7FF_FFFF]
−
Error Config area (ERRCFG) [FFFE_E000 to FFFE_FFFF]
−
AppS area [B800_0000 to BFFF_FFFF]
−
Register area in SUBSYSTEM [5020_0000 to 5FFF_FFFF]
MPU attribute "Device" or "Strongly Ordered" is required for accesses to areas below, in particular
situation.
−
FLASH Memory (when writing commands)
Summary of Contents for S6J3200 Series
