NXP Semiconductors MWCT101 S Series, Reference Manual

Page: 1083 / 1761

Chapter 40
Programmable delay block (PDB)
Chip-specific PDB information
40.1.1 Instantiation Information
40.1.1.1 PDB output trigger connections
WCT101xS contains two PDB modules.
Table 40-1. PDB output trigger connections
Chip Number of slots on
PDB
Number of triggers
per slot
Number of Pulse Out Number of pre-
triggers slot
WCT1014S 2 1 1 8
WCT1015S 3 1 1 8
WCT1016S 4 1 1 8
PDB has slots, also referred as PDB channels, for connectivity with chip. Each slot
consists of pulse out, triggers, and pre-triggers as mentioned in above table. See
Figure
40-6 and Figure 37-2
40.1.1.2 PDB Input Trigger Connections
On this device, the PDB trigger source selection is implemented through the TRGMUX
module. For each PDB unit, there is only one trigger input from TRGMUX, but it
supports different trigger sources. The internal trigger mux inside PDB is not used any
more.
40.1
MWCT101xS Series Reference Manual, Rev. 3, 07/2019
NXP Semiconductors 1083