NXP Semiconductors MWCT101 S Series, Reference Manual, Page: 1171 / 1761

Field Function
LDFQ = 2: There is a reload point each 3 reload oportunities.
LDFQ = 3: There is a reload point each 4 reload oportunities.
This pattern continues up to a maximum of 32.
41.4.3.22 FTM Fault Input Polarity (FLTPOL)
41.4.3.22.1 Offset
Register Offset
FLTPOL 88h
41.4.3.22.2 Function
This register defines the fault inputs polarity.
41.4.3.22.3 Diagram
Bits 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
R 0
W
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Bits 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
R 0
FLT3POL FLT2POL FLT1POL FLT0POL
W
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
41.4.3.22.4 Fields
Field Function
31-4
—
Reserved
3
FLT3POL
Fault Input 3 Polarity
Defines the polarity of the fault input.
This field is write protected. It can be written only when MODE[WPDIS] = 1.
Table continues on the next page...
Chapter 41 FlexTimer Module (FTM)
MWCT101xS Series Reference Manual, Rev. 3, 07/2019
NXP Semiconductors 1171