NXP Semiconductors MWCT101 S Series, Reference Manual

Page: 1019 / 1761

38.4.16 ADC General Calibration Value Register S (CLPS)
38.4.16.1 Offset
Register Offset
CLPS B4h
38.4.16.2 Function
The General Calibration Value Registers (CLPx) contain calibration information that is
generated by the calibration function. These registers contain seven signed calibration
values of varying widths in two's complement format. CLPx are automatically set when
the self-calibration sequence is done, that is, CAL is cleared. If these registers are written
by the user after calibration, the linearity error specifications may not be met.
38.4.16.3 Diagram
Bits 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
R 0
W
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Bits 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
R 0
CLPS
W
Reset
0 0 0 0 0 0 0 0 0 u
1
u u u u u u
1. Reset values are loaded out of IFR.
38.4.16.4 Fields
Field Function
31-7
—
Reserved
Table continues on the next page...
Chapter 38 Analog-to-Digital Converter (ADC)
MWCT101xS Series Reference Manual, Rev. 3, 07/2019
NXP Semiconductors 1019