NXP Semiconductors MWCT101 S Series, Reference Manual

Page: 1479 / 1761

Field Function
15
LBKDIE
LIN Break Detect Interrupt Enable
LBKDIE enables the LIN break detect flag, STAT[LBKDIF], to generate interrupt requests.
0b - Hardware interrupts from STAT[LBKDIF] flag are disabled (use polling).
1b - Hardware interrupt requested when STAT[LBKDIF] flag is 1.
14
RXEDGIE
RX Input Active Edge Interrupt Enable
Enables the receive input active edge, STAT[RXEDGIF], to generate interrupt requests. Changing
CTRL[LOOP] or CTRL[RSRC] when RXEDGIE is set can cause the STAT[RXEDGIF] flag to set.
0b - Hardware interrupts from STAT[RXEDGIF] are disabled.
1b - Hardware interrupt is requested when STAT[RXEDGIF] flag is 1.
13
SBNS
Stop Bit Number Select
SBNS determines whether data characters have one or two stop bits. This bit should only be changed
when the transmitter and receiver are both disabled.
0b - One stop bit.
1b - Two stop bits.
12-0
SBR
Baud Rate Modulo Divisor.
The 13 bits in SBR[12:0] set the modulo divide rate for the baud rate generator. When SBR is 1 - 8191,
the baud rate equals "baud clock / ((OSR+1) × SBR)". The 13-bit baud rate setting [SBR12:SBR0] must
be updated only when the transmitter and receiver are both disabled (CTRL[RE] and CTRL[TE] are both
0).
47.3.1.7 LPUART Status Register (STAT)
47.3.1.7.1 Offset
Register Offset
STAT 14h
Chapter 47 Low Power Universal Asynchronous Receiver/Transmitter (LPUART)
MWCT101xS Series Reference Manual, Rev. 3, 07/2019
NXP Semiconductors 1479