NXP Semiconductors MWCT101 S Series, Reference Manual

Page: 107 / 1761

8.3.1 Crossbar Switch (AXBS) Slave Configuration (MCM_PLASC)
PLASC is a 16-bit read-only register identifying the presence/absence of bus slave
connections to the device’s crossbar switch.
Address: E008_0000h base + 8h offset = E008_0008h
Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Read 0 ASC
Write
Reset 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1
MCM_PLASC field descriptions
Field Description
15–8
Reserved
This field is reserved.
This read-only field is reserved and always has the value 0.
ASC Each bit in the ASC field indicates whether there is a corresponding connection to the crossbar switch's
slave input port.
0 A bus slave connection to AXBS input port n is absent
1 A bus slave connection to AXBS input port n is present
8.3.2 Crossbar Switch (AXBS) Master Configuration (MCM_PLAMC)
PLAMC is a 16-bit read-only register identifying the presence/absence of bus master
connections to the device's crossbar switch.
Address: E008_0000h base + Ah offset = E008_000Ah
Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Read 0 AMC
Write
Reset 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1
MCM_PLAMC field descriptions
Field Description
15–8
Reserved
This field is reserved.
This read-only field is reserved and always has the value 0.
AMC Each bit in the AMC field indicates whether there is a corresponding connection to the AXBS master input
port.
Table continues on the next page...
Chapter 8 Miscellaneous Control Module (MCM)
MWCT101xS Series Reference Manual, Rev. 3, 07/2019
NXP Semiconductors 107